Use and care guide

22
Changing the basic settings
The cooktop must be turned off.
1. Turn on the cooktop with the main switch.
2. Within10 seconds, touch the KITCHEN TIMER touch
key for about 4 seconds.
The first four displays provide product information.
Touch the settings area to view the individual displays.
3. Touching the KITCHEN TIMER touch key again takes
you to the basic settings.
™ ‚ lights up in the timer display and ‹ light up in the
displays.
4. Touch the KITCHEN TIMER touch key repeatedly until
the indicator for the required function is displayed.
5. Set the required value with the number keys.
6. Touch the KITCHEN TIMER touch key again for at
least 4 seconds. The settings have been stored.
Quit basic settings
Turn the cooktop off with the main switch.
Energy consumption indicator
This function indicates the total amount of energy
consumed by this cooktop the last time it was used for
cooking.
Once switched off, the energy consumption in kWh is
displayed for 10 seconds.
The picture shows an example with an energy
consumption of ‚.‹‰ kWh.
You can find out how to turn this function on in the
section on ~ "Basic settings"
™‹
Restoring the factory settings
‹ Individual settings.*
‚ Restore factory settings.
Display Function
* Factory settings
Product information Display
Directory for the technical after-sales
service (TK)
‹‚
FD number
”š
FD number 1
Š†.
FD number 2
‹.†
7,0(5
&22.
6723
:$7&+
/2&.
.,7&+(1
7,0(5
7,0(5
&22. 6723
:$7&+
/2&.
.,7&+(1
7,0(5