installation instructions

Page 4
Parts Supplied
1 - Hardware bag
• 4 - 5 x 45 mm installation screws
• 4 - 5.4 x 75 mm installation screws
• 11 - 4,2 x 8 mm installation screws
• 4 - 10 x 60 mm drywall anchors
• 2 - 8 x 40 mm anchors
• Torx adapter 20
• 2 - Upper duct cover brackets
• Mounting template
Installation Instructions
On some models, optional duct covers and telescoping
extensions may be used to ll the space between the hood
and ceiling in wall mount installations.
Model Duct Cover
HMWB30WS DC30MTW
HMWB361WS
DC36MTW
HMWB36WS
HMWB481WS DC48MTW
Duct Cover Extension Installation
IMPORTANT: Secure the Chimney Hood to the wall after
installing the Extension Mounting Bracket, but before
installing the Telescoping Chimney Extension.
NOTE: Carefully remove the protective lm from the duct
cover and hood assembly prior to the start of the installa-
tion. Use one hand to maintain the duct cover steady while
the other hand removes the protective lm.
Securing the Telescoping Chimney Extension Bracket
1. Ensure that the minimum height of 30” (762 mm) from
the bottom of the hood to the cooking surface will be
maintained.
2. Locate two studs at the mounting brackets location.
inches (mm)
A
B
Max. 61”
(1540)
Min. 31”
(787)
30
3
/
8
”
(770)
30
7
/
8
”
(784)
11”
(280)
Model A B
30” 11
6
⁄8” (299) 29
6
⁄8” (756)
36” 11
6
⁄8” (299) 35
3
⁄4” (908)
48” 11
6
⁄8” (299) 48” (1212)
3. Mark the range hood vertical centerline. Make sure the
line run through the very top of the ceiling.
4. Locate the mounting template in an 90ª angle against
the recently made centerline.
5. Make the pilot holes depending on your duct cover
width.
Center line
Roof
Cent
erlin
e on w
all
DI
M0
15148
9
Roof
Roof
Ø
3
/
1
6
"
(4.7 mm)
Ø
3
/
1
6
"
(4.7 mm)
48"
36"
30"
48"
36"
30"
48
”
Duct cover
Left edge
48
”
Du
ct cover
In
stallation hol
e
s
36”
Duct
cover
Installation holes
30”
Duct cove
r
Ins
tall
ation
holes
36”
Du
ct cover
Left e
dge
3
0”
Duct cove
r
Left edge
Ø
3
/
1
6
"
(4.7 m
m)
36"
30"
48"
48
”
Duct co
ver
Right edg
e
36”
Duct cover
R
i
g
ht edge
30”
Duct cover
Right edge
48”
Duct cover
Installation holes
36”
Duct
cover
Installation holes
30”
Duct cover
Installation holes