Installation instructions

10
7
• Check all electrical connections to ensure they are secure
and then reattach the junction box cover.
• Place adhesive backed cord clip (provided in the
installation kit) 5 inches from leg adjuster as shown in
the figure above and route power cord through the clip.
Note:The length of cord measured from the plastic back
strap to the receptacle should be ≤ 47.25” (1,200 mm).
• Plug the end of the supply cord into the back of the
dishwasher as shown until it clicks.
Note: Only use the included power cord. If cord is missing
order kit SMZPC002UC through Customer Service.
Adhesive
backed
cord clip
Leg Adjuster
Strap
2"
(5 cm)
A
lternate cable routing