Installation instructions

11
Installation of Mounting Brackets
• Top Mount is used for counter tops made of wood or
other materials that can be easily drilled. If you have
solid surface, marble, granite, or other very hard counter-
tops, skip to step 9 now.
• If insulation is covering the area in 8a, fold it back.
• Orient the mounting brackets (C) for top mounting as
shown in 8b.
• Using pliers, bend side flanges down as shown in 8c and
8d so the bracket will not slip out of slot in frame. Do not
attach to cabinet yet.
Avoid Tip Over Hazard!
Do not use the dishwasher until it is completely
installed. When opening the door on an uninstalled
dishwasher, carefully open the door while supporting
the rear of the unit. Failure to follow this warning can
result in serious injury.
WARNING
Note: Before installing the supplied counter top mounting
brackets, decide which method of securing the dishwasher
into its enclosure will be used.
Once the mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the mounting
brackets and the dishwasher.
If you have a Fully Integrated Panel, do not attach mounting
brackets until after attaching the panel to the door.
8
• Side Mount is used for counter tops made of marble,
granite, or other very hard materials that cannot be easily
drilled.
• Grasp mounting bracket (C) with pliers and fold bracket at
the perforation over onto itself as shown in 9a.
• Slip bracket flange through side slots in frame as shown
in 9b.
• Using pliers, bend side flanges down as shown in 8c and
8d so the bracket will not slip out of slot in frame. Do not
attach to cabinet yet.
9
!