Installation instructions
12
• If your sink is to the right side of where you are installing
the dishwasher, you will need to reposition the hoses and
power cord behind the dishwasher before installing.
• To do so, unhook the strap that the hoses are running
through on the back of the dishwasher base and position
them per your requirements.
• If your sink is to the left side, leave the hoses and power
cord as they came.
Positioning the Dishwasher
• Reposition the hoses so they run through the strap on the
other side.
• Be sure to snap the strap back in place to secure the hoses
as shown.
11
• To avoid scratching the floor, use floor protection and
caution when sliding the dishwasher into the cabinet. Use
hands on both sides of dishwasher to push evenly.
• Pull water inlet, drain hose and power cord through the
hole in cabinet as shown.
12
10
NOTICE : Be sure to pull the hoses all the way into the
adjacent cabinet while pushing the dishwasher in. Otherwise,
the hoses can fold, kink or break, potentially causing obstruc-
tions or leaks.