Installation instructions

16
Drain Connection
IMPORTANT NOTES about your drain connection:
• If local ordinance require an air gap, install it according to
the manufacturer’s instructions.
• If the dishwasher drain hose is to be connected to a dis-
poser dishwasher drain connection, remove the plug from
the disposer’s dishwasher drain connection.
• The dishwasher drain hose must have one place along its
length that is securely attached 33" (508 mm) above the floor.
• The drain hose length can be extended if necessary. The
maximum length of the drain hose, including the hose
leading to the air gap, is 150" (380 cm).
• You may use the piece you removed in Step 7 to attach to
the inside of the adjacent cabinet and hang the drain hose
from as shown (screws are not supplied) in place of using
a Nonmetallic Tie as pictured in the next illustrations. Do
not exceed 43” in drain hose height.
• The dishwasher drain hose must be installed with a portion
of it at least 33” (84 cm) off the floor; otherwise the dish-
washer may not drain properly.
Note: Place hose clamp (C) around end of drain hose BEFORE
connecting to the plumbing.

19
min 33” (84 cm)
max 43” (110 cm)
min 33” (84 cm)
max 43” (110 cm)
• The dishwasher drain hose may be connected to the drain
plumbing using an air gap in one of two ways:
- Connect to the under sink dishwasher drain connection (20a).
- Connect to a disposer dishwasher drain connection (20b).
• The dishwasher drain hose may be connected to the drain
plumbing using a high loop in one of two ways:
- Connect to the under sink dishwasher drain connection (20c).
- Connect to a disposer dishwasher drain connection (20d).




20
a
B
B
B
• Use the clamp provided (C) to
attach the drain hose to the
house plumbing as shown.







21
B
B
b
c d