Installation instructions

5
Elbow connection with 3/4” female hose threads on one end and fits your water supply line
(copper tubing, compression fitting, or braided hose) on the other.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.
Only needed if house water supply line is not sufficient.
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose).
Tools and Materials Needed

Wire Cutter
Needle Nose Pliers
Pliers
Wire Stripper
ø1/16 in
(2 mm)
Adjustable wrench
Tape Measure
Drill
Hole Saw
Flat Screwdriver
Level
Phillips Screwdriver
STATE OF CALIFORNIA PROPOSITION 65 WARNING:
WARNING
Cancer and Reprodutive Harm - www.P65Warnings.ca.gov