Installation instructions
7
Enclosure Requirements
Scalding or Electrical Shock Hazard!
Make sure the water supply and electrical supply are
shut off before installation or service.
Electrical Shock/Fire Hazard!
Do not allow the electrical and supply lines to touch.
Note: This dishwasher is designed to be enclosed on the top,
back and both sides by standard residential kitchen cabinetry.
• Select a location as close to the sink as possible for easy
access to water supply and drain lines.
• For proper dishwasher operation and appearance, ensure
that the enclosure is square and has the dimensions
shown.
• If the dishwasher is to be installed in a corner, ensure that
there is adequate clearance to open the door as shown.
min 34"
(864 mm)
min 24"
(610 mm)
23
5/8
" - 24
1/4
"
(600 - 616 mm)
1
2
WARNING
• After locating the proper place for your dishwasher, create
required openings in your cabinets in order to allow for
water, drain and electrical lines on the appropriate side.
• The holes should be cut within the 7 x 2.5" area shown.
• If the opening is made through wood, sand it smooth.
• IIf the opening is made through metal, use the Edge
Protector Kit SMZEP001UC, or other approved method
to protect wiring from damage.
7"
(177.8 mm)
3
!