installation guide

12
Installation of Mounting Brackets
• Top Mount is used for counter tops made of wood or
other materials that can be easily drilled. If you have
solid surface, marble, granite, or other very hard counter-
tops, skip to step 13 now.
• If insulation is covering the area in 12a, fold it back.
• Orient the mounting brackets (D) for top mounting as
shown in12b.
• Using pliers, bend side flanges down as shown in 12c
and 12d so the bracket will not slip out of slot in frame.
Do not attach to cabinet yet.
Avoid Tip Over Hazard!
Do not use the dishwasher until it is completely
installed. When opening the door on an uninstalled
dishwasher, carefully open the door while supporting
the rear of the unit. Failure to follow this warning can
result in serious injury.
WARNING
Note: Before installing the supplied counter top mounting
brackets, decide which method of securing the dishwasher
into its enclosure will be used.
Once the mounting brackets are installed on the dishwasher,
removing them is difficult and will damage the mounting
brackets and the dishwasher.
If you have a Fully Integrated Panel, do not attach mounting
brackets until after attaching the panel to the door.
12
• Side Mount is used for counter tops made of marble,
granite, or other very hard materials that cannot be easily
drilled.
• Grasp mounting bracket (D) with pliers and fold bracket at
the perforation over onto itself as shown in 13a.
• Slip bracket flange through side slots in frame as shown
in 13b.
• Using pliers, bend side flanges down as shown in 12c and
12d so the bracket will not slip out of slot in frame. Do not
attach to cabinet yet.
13
!