installation guide

5
Elbow connection with 3/4” female hose threads on one end and fits your water supply line
(copper tubing, compression fitting, or braided hose) on the other.
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors
rated 75° C or higher.
Only needed if house electrical line is not adequate.
Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.
Only needed if house water supply line is not sufficient.
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose).
UL listed conduit connector or strain relief is required if you attach the field wiring directly
to the terminal block.
Tools and Materials Needed

Wire Cutter
Needle Nose Pliers
Pliers
Wire Stripper
ø1/16 in
(2 mm)
Adjustable wrench
Tape Measure
Drill
Hole Saw
Flat Screwdriver
Level
Phillips Screwdriver