Instructions for Use
Table Of Contents
- Table of contentsen-us Operating instructions
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- Causes of Damage
- Getting Started
- Appliance overview
- Operating panel
- Dishwasher interior components
- Display indicators
- Info button (Info button
- Switching on the appliance for the first time
- Settings
- Change the setting as follows:
- 1. Open the door.
- 2. Switch on ON/OFF switch (.
- 3. Press Info button ( 8 for 3 seconds until the following text is indicated on the display window at the top @:
- 4. Keep pressing button > ` until the required setting is displayed.
- 5. Make the selection with setting buttons + - X.
- 6. Press and hold the Info button ( 8 for 3 seconds.
- Note:
- Home Connect™ System
- Info buttonInfo button
- Setting up the app
- Setting up Home Connect
- 1. Open the door.
- 2. Switch on the On/Off switch (.
- 3. Press Info button 8 for 3 seconds until the following text is indicated on the display window at the top @:
- 4. Keep pressing button > h until the required setting is indicated on the display window at the top @.
- 5. Make the setting with setting buttons + - X. See table in section
- 6. Press and hold the Info button 8 for 3 seconds.
- 1. Open the door.
- Wi-Fi |
- Network login
- Connect to App
- Remote start button
- Wi-Fi without a connection to the Home Connect server ƒWi-Fi without a connection to the Home Connect server
- Remote diagnosis ~Remote diagnosis
- Water softening system / special salt
- Water hardness table
- Adjusting the water softening system
- Set the softening system as follows:
- 1. Ask your local water utility company for the water hardness value of the tap water.
- 2. Required setting can be found in the water hardness table.
- 3. Open the door.
- 4. Switch on ON/OFF switch (.
- 5. Press Info button ( 8 for 3 seconds until the following text is indicated on the display window at the top @:
- 6. Keep pressing button > ` until the water hardness is indicated on the display window at the top @.
- 7. Make the selection with setting buttons + - X.
- 8. Press and hold the Info button ( 8 for 3 seconds.
- Using special salt
- Using detergents with salt componentDetergent with a salt component
- Switching off low salt indicator / water softening systemSwitching off water softening system
- Rinse Aid
- Adding rinse aid
- Setting the amount of rinse aid used
- Set the amount of rinse aid as follows:
- 1. Open the door.
- 2. Press on ON/OFF button (.
- 3. Press Info button ( 8 for 3 seconds until the following text is indicated on the display window at the top @:
- 4. Keep pressing button > ` until the rinse aid dispenser is indicated on the display window at the top @.
- 5. Make the selection with setting buttons + - X.
- 6. Press and hold the Info button ( 8 for 3 seconds.
- Note:
- Switching off rinse aid refill indicator
- Loading the Dishwasher
- Dishware material
- Loading the racks
- Loading patterns
- Loading patterns for lower rack
- 12 place setting suggested loading pattern
- Alternate loading pattern
- Alternate loading pattern with pots and pans
- Alternate loading with stemware *
- Loading patterns for upper rack
- 12 place setting suggested loading pattern, with cutlery drawer
- 12 place setting suggested loading with Entertainer’s Drawer
- Alternate loading pattern
- Alternate loading pattern with stemware
- Loading patterns for third rack
- 12 place setting suggested loading pattern *
- Third rack 1*
- Loading the silverware basket
- The Double Flex silverware basket
- Side by side
- Back to back
- Note:
- Loading patterns silverware basket
- Suggested loading pattern with Entertainer’s Drawer - 12 place setting
- Alternate loading pattern
- Unloading the dishwasher
- RackMatic® System
- Adjusting the height of the rack *Adjusting the height of the rack
- 9.4 in (24 cm)
- 13.4 in (34 cm)
- 10.4 in (26.5 cm)
- 12 in (30.5 cm)
- 11.4 in (29 cm)
- 11 in (28 cm)
- 7 in (18 cm)
- 13.4 in (34 cm)
- 8 in (20.5 cm)
- 12 in (30.5 cm)
- 9 in (23 cm)
- 11 in (28 cm)
- Rack accessories
- Removing/Installing third rack
- Removing/Installing upper rack with Rackmatic®
- Detergent
- Dishwasher Cycles
- Dishwasher Cycle Options
- Operating the Dishwasher
- Note:
- Protection against unintentional operation
- Operating the touch buttons
- Changing the settings
- Change the setting as follows:
- 1. Open the door.
- 2. Switch on On/Off button (.
- 3. Press Info button 8 for 3 seconds until the following text is indicated in the digital display @:
- 4. Keep pressing button > ` until the required setting is indicated in the display window at the top @.
- 5. Make the selection with setting buttons + - X.
- 6. Press and hold the Info button 8 for 3 seconds.
- Tip:
- AquaSensor
- Time display
- Sensor setting
- Extra Dry
- Eco forecast
- Auto power off
- Tone volume
- Button volume
- Greeting
- Factory setting
- Switching the appliance on
- Delay start time
- 1. Open the door.
- 2. Switch on On/Off switch (.
- 3. Select wash cycle 0.
- 4. Press Delay start button `.
- 5. Keep pressing the setting buttons + - X until the displayed time corresponds with your requirements.
- 6. Press Start button )*, timer programming is activated.
- 7. To delete the Delay start time, press Start button )* for about 3 seconds.
- 8. Close the door.
- Note:
- 1. Open the door.
- Sapphire Glow (emotionLight™) *
- Star Glow (emotionLight Pro™) *
- Time Remaining Power Beam® (Optical display while the wash cycle is running)
- Using the Star Speed® cycle
- 1. Open the door and press the ON/OFF button (
- 2. Press the Star Speed® button. The dishwasher should be empty and without detergent for the preheating period.
- 3. Press the Start button )* and close the door to begin preheating. The Time Remaining PowerBeam® will project an image of a thermometer alternating with the time remaining for preheat. Once the time reamining counts down to 0:00, the Time Remainin...
- 4. Open the door to begin loading dishes for the first Star Speed® wash. (Load dishes within an hour once the preheating is finished).
- 5. Add detergent (use powder or liquid detergent – do not use tablets in this cycle), press Start button )* and close the door within 4 seconds.
- 6. The Time Remaining PowerBeam® will now show the time remaining.
- 7. When the cycle is done, the Time Remaining PowerBeam® will turn off.
- 8. The next Star Speed® cycles can run without any preheating (maximum of 60 minutes in between cycles).
- 1. Open the door and press the ON/OFF button (
- Wash cycle end
- Switching off the appliance
- Interrupting the wash cycle
- Cancel a cycle (reset)
- Changing the wash cycle
- Care and Maintenance
- Cleaning the dishwasher
- Filters
- Filter components
- The filter system 1j consists of three parts.
- Cleaning intervals
- Note:
- To check or clean the filter system:
- 1. After each wash cycle check the filters for residue.
- Spray arms
- Drain pump
- 9 WARNING
- 1. Disconnect the appliance from the power supply.
- 2. Take out upper rack 12 and lower rack 9*.
- 3. Remove the filters 1j.
- 4. Scoop out standing water - use a sponge if necessary.
- 5. Using a spoon, pry off the pump cover (as shown) until it clicks, then grip the cover and pull upward until it resists and then pull forward (1). Remove cover completely.
- 6. Check inner compartment and remove any foreign objects.
- 7. Place pump cover in the original position (2) and press down until it engages (3).
- 8. Place cover in the original position, press down and engage.
- 9. Reinstall filters.
- 10. Re-insert racks.
- Note:
- Preparing your unit for vacation
- Winterizing your unit
- Troubleshooting
- Customer Service
- Statement of Limited Product Warranty
- Table des matièresfr-ca Notice d'utilisation
- Indications de sécurité
- CONSIGNES DE SÉCURITÉ IMPORTANTES
- LISEZ ET CONSERVEZ CES INSTRUCTIONS
- Pour réduire le risque d'incendie, de choc électrique, ou de blessures graves, respectez les consignes suivantes :Risque d'incendie, de choc électrique, ou de blessures graves
- INSTRUCTIONS DE MISE À LA TERRE
- Fonctionnement normal
- Entretien et maintenance corrects
- Avertissement issu de la proposition 65 :
- Causes de pannes
- Mise en marche
- Vue d'ensemble de l'appareil
- Panneau de commande
- Composants internes du lave-vaisselle
- Indicateurs
- Bouton Information (Bouton Information
- Première mise sous tension de l'appareil
- Réglages
- Changez les réglages comme suit :
- 1. Ouvrez la porte.
- 2. Appuyez sur le bouton ON/OFF (MARCHE/ARRÊT) (.
- 3. Appuyez sur le bouton Information ( 8 durant 3 secondes jusqu'à ce que le message suivant soit affiché dans la fenêtre d'affichage supérieure @ :
- 4. Appuyez sur le bouton > ` jusqu'à ce que le réglage désiré soit affiché.
- 5. Effectuez le réglage à l'aide des boutons + - X.
- 6. Appuyez et maintenez le bouton Information enfoncé ( 8 pendant 3 secondes.
- Remarque :
- Home Connect™
- Touche InfoTouche Info
- Configurer l’app
- Configuration de Home Connect
- 1. Ouvrez la porte.
- 2. Appuyez sur le bouton On/Off (Marche/Arrêt) (.
- 3. Appuyez sur la touche Info 8 durant 3 secondes jusqu'à ce que le message suivant soit affiché dans la fenêtre d'affichage supérieure @ :
- 4. Maintenez le bouton > h enfoncé jusqu'à ce que le réglage requis soit affiché dans la fenêtre d'affichage supérieure @.
- 5. Effectuez le réglage à l'aide des boutons + - X.Consultez le tableau dans la section
- 6. Appuyez et maintenez la touche Info enfoncée 8 pendant 3 secondes.
- 1. Ouvrez la porte.
- Wi-Fi |
- Network login (connexion au réseau)
- Connexion à l'application
- Bouton de télédémarrage
- Wi-Fi sans connexion au serveur Home Connect ƒWi-Fi sans connexion au serveur Home Connect
- Diagnostic à distance ~Diagnostic à distance
- Système d'adoucissement de l'eau / sels
- Tableau de dureté de l'eau
- Réglage du système d'adoucissement de l'eau
- Réglez le système d'adoucissement comme suit :
- 1. Demandez le degré de dureté de votre eau courante à votre fournisseur d'eau.
- 2. Le réglage à effectuer se trouve dans le tableau de dureté de l'eau.
- 3. Ouvrez la porte.
- 4. Appuyez sur le bouton ON/OFF (MARCHE/ARRÊT) (.
- 5. Appuyez sur le bouton Information ( 8 durant 3 secondes jusqu'à ce que le message suivant soit affiché dans la fenêtre d'affichage supérieure @ :
- 6. Maintenez le bouton > ` enfoncé jusqu'à ce que la dureté de l'eau soit affichée dans la fenêtre d'affichage supérieure@.
- 7. Effectuez le réglage à l'aide des boutons + - X.
- 8. Appuyez et maintenez le bouton Information enfoncé ( 8 pendant 3 secondes.
- Utilisation des sels spéciaux
- Utilisation de détergents chargés en selsDétergent chargé en sels
- Éteindre l'indicateur de niveau bas de sels/le système d'adoucissement de l'eauÉteindre le système d'adoucissement de l'eau
- Produit de rinçage
- Ajout d'agent de rinçage
- AVIS :
- 1. Ouvrez le distributeur de liquide de rinçage 92 en appuyant sur le loquet du couvercle et en tirant sur celui-ci.
- 2. Remplissez le distributeur 92 de produit de rinçage liquide jusqu'à pleine capacité. Il ne doit pas déborder. Évitez tout déversement dans le trou d'aération.
- 3. Fermez le couvercle. Le couvercle doit être hermétiquement fermé jusqu'à l'encliquetage du loquet, pour garantir son étanchéité.
- 4. Essuyez tout excédent de produit de rinçage déversé lorsque le réservoir est plein.
- Conseil :
- AVIS :
- Réglage de la quantité de produit de rinçage utilisé
- Réglez la quantité d'agent de rinçage comme suit :
- 1. Ouvrez la porte.
- 2. Appuyez sur le bouton ON/OFF (MARCHE/ARRÊT) (.
- 3. Appuyez sur le bouton Information ( 8 durant 3 secondes jusqu'à ce que le message suivant soit affiché dans la fenêtre d'affichage supérieure @ :
- 4. Maintenez le bouton > ` enfoncé jusqu'à ce que le distributeur d'agent de rinçage soit affiché dans la fenêtre d'affichage supérieure@.
- 5. Effectuez le réglage à l'aide des boutons + - X.
- 6. Appuyez et maintenez le bouton Information enfoncé ( 8 pendant 3 secondes.
- Remarque :
- Éteindre l'indicateur d'agent de remplissage de rinçage
- Ajout d'agent de rinçage
- Chargement du lave-vaisselle
- Matériaux lavables au lave-vaisselle
- Chargement des paniers
- Autres profils de chargement
- Chargement du panier inférieur
- Placement recommandé en configuration 12 places
- Autre configuration
- Autre profil de chargement avec chaudrons et casseroles
- Autre configuration avec verres à vin *
- Chargement du panier supérieur
- Placement recommandé en configuration 12 places avec tiroir d'ustensiles
- Placement recommandé en configuration 12 places avec le panier à soirées
- Autre configuration
- Autre profil de chargement avec verres à vin
- Chargement du troisième supérieur
- Placement recommandé en configuration 12 places *
- Troisième panier 1*
- Chargement du panier à ustensiles
- Le panier à ustensiles Double Flex
- Côte à côte
- Dos à dos
- Remarque :
- Chargement du panier d'argenterie
- Placement recommandé en configuration 12 places avec le panier à soirées
- Autre configuration
- Retrait de la vaisselle
- RackMatic®
- Réglage de la hauteur du panier*Réglage de la hauteur du panier
- 24 cm (9,4 po)
- 34 cm (13,4 po)
- 26,5 cm (10,4 po)
- 30,5 cm (12 po)
- 29 cm (11,4 po)
- 28 cm (11 po)
- 18 cm (7 po)
- 34 cm (13,4 po)
- 20,5 cm (8 po)
- 30,5 cm (12 po)
- 23 cm (9 po)
- 28 cm (11 po)
- Accessoires de panier
- Retirer/installer le troisième panier
- Retirer le troisième panier 1*
- 1. Sortez le troisième panier jusqu'au bout (1).
- 2. Soulevez les galets supérieurs au-dessus des crochets de butée des deux glissières (2).
- 3. Sortez le troisième panier vers l'avant et vers le haut, de sorte que les coins de retenue et les galets inférieurs du panier passent au-dessus des crochets de butée des deux glissières (3).
- Installer le troisième panier 1*
- 1. Sortez les glissières du troisième panier jusqu'au bout (1).
- 2. Insérez le troisième panier incliné. Assurez-vous que les crochets de butée des deux glissières coulissent entre les coins de retenue et les galets inférieurs du troisième panier (2).
- 3. Glissez le troisième panier à l'intérieur et soulevez les galets supérieurs au-dessus des crochets de butée avant des deux glissières (3).
- 4. Insérez le troisième panier en le poussant (4).
- Retirer/installer le panier supérieur avec Rackmatic®
- Retirer le panier supérieur 12
- 1. Sortez le panier supérieur jusqu'au bout (1).
- 1. Sortez les glissières du panier supérieur jusqu'au bout (1).
- 2. Insérez le panier supérieur incliné. Assurez-vous que les crochets de butée des deux glissières coulissent entre les galets supérieurs et inférieurs sur le côté arrière du panier (2).
- 3. Glissez le panier supérieur à l'intérieur et soulevez les galets supérieurs au-dessus des crochets de butée avant des deux glissières (3).
- 4. Insérez le panier supérieur en le poussant (4).
- Détergent
- Cycles du lave-vaisselle
- Options de cycles du lave-vaisselle
- Mise en marche du lave-vaisselle
- Remarque :
- Protection contre une opération involontaire
- Utilisation des boutons tactiles
- Modification des réglages
- Changez les réglages comme suit :
- 1. Ouvrez la porte.
- 2. Appuyez sur le bouton Marche/Arrêt (.
- 3. Appuyez sur la touche Info 8 durant 3 secondes jusqu'à ce que le message suivant soit affiché dans l'affichage digital @ :
- 4. Maintenez le bouton > ` enfoncé jusqu'à ce que le réglage requis soit affiché dans la fenêtre d'affichage supérieure @.
- 5. Effectuez le réglage à l'aide des boutons + - .X.
- 6. Appuyez et maintenez la touche Info enfoncé 8 pendant 3 secondes.
- Conseil :
- AquaSensor AquaSensor
- Affichage de l'heure
- Sensor setting (réglage du capteur)
- Extra Dry (extra sec)
- Impact écologique
- Auto power off (Arrêt automatique)
- Volume de la sonnerie
- Bouton de volume
- Message de bienvenue
- Réglages d'usine
- Mise sous tension de l'appareil
- Temps de départ différé
- 1. Ouvrez la porte.
- 2. Appuyez sur le bouton On/Off (Marche/arrêt) (.
- 3. Sélectionnez le cycle de lavage 0.
- 4. Appuyez sur le bouton Delay start (Départ différé) `.
- 5. Continuez à appuyer sur les boutons de réglage + - X jusqu'à l'obtention du délai désiré.
- 6. Appuyez sur le bouton Start (démarrer) )*, le démarrage différé est activé.
- 7. Pour effacer le temps de Départ différé appuyez sur le bouton Start (démarrer) )* pendant environ 3 secondes.
- 8. Fermez la porte.
- Remarque :
- 1. Ouvrez la porte.
- Sapphire Glow (emotionLight™) *
- Star Glow (emotionLight Pro™) *
- Time Remaining Power BeamMC (affichage optique pendant le cycle de lavage)
- Utiliser le cycle Star Speed®
- 1. Ouvrez la porte et appuyez sur le bouton ON/OFF (.
- 2. Appuyez sur le bouton Star Speed. Le lave-vaisselle devrait être vide et ne pas contenir de détergent pendant le préchauffage.
- 3. Appuyez sur le bouton Start )* et fermez la porte pour commencer le préchauffage. Le Time Remaining PowerBeam® projette une image d’un thermomètre en alternance avec le délai de préchauffage restant. Dès que le décompte du délai atteint ...
- 4. Ouvrez la porte pour commencer le chargement de la vaisselle pour le premier lavage Star Speed®. (chargez la vaisselle dans l'heure suivant le préchauffage).
- 5. Ajoutez du détergent (liquide ou en poudre - n'utilisez pas de comprimés pour ce cycle), appuyez sur Start )* et fermez la porte dans les 4 secondes qui suivent.
- 6. Le Time Remaining PowerBeam® indiquera maintenant le délai restant.
- 7. Le Time Remaining PowerBeam® s'éteint à la fin du cycle.
- 8. Aucun préchauffage n'est nécessaire pour les prochains cycles Star Speed® (maximum de 60 minutes entre les cycles).
- 1. Ouvrez la porte et appuyez sur le bouton ON/OFF (.
- Fin du cycle de lavage
- Mise hors tension de l'appareil
- Interruption du cycle de lavage
- Arrêt du cycle de lavage (réinitialisation)
- Changement du cycle de lavage
- Entretien et maintenance
- Nettoyer le filtre du lave-vaisselle
- Filtres
- Éléments de filtrage
- Le système de filtration 1j est constitué de trois éléments.
- Intervalles de nettoyage
- Remarque :
- Pour vérifier ou nettoyer le système de filtration :
- 1. Recherchez des traces de résidus dans les filtres après chaque cycle de lavage.
- Bras gicleurs
- Pompe pour eaux résiduaires
- 9 AVERTISSEMENT
- 1. Débranchez l'appareil du réseau électrique.
- 2. Sortez le panier supérieur 12 ainsi que le panier inférieur 9*.
- 3. Retirez les filtres 1j.
- 4. Videz l'eau résiduelle avec un récipient approprié - utilisez une éponge au besoin.
- 5. À l'aide d'une cuillère, débloquez le couvercle de la pompe (tel qu'illustré) jusqu'à entendre un clic, saisissez-le ensuite et tirez-le jusqu'à ce qu'une légère résistance se fasse sentir, puis tirez-le vers l'avant (1). Retirez complèt...
- 6. Contrôlez le compartiment interne et éliminez tout objet étranger.
- 7. Placez le couvercle de la pompe à sa position initiale (2), appuyez jusqu'à ce qu'il s'encliquette(3).
- 8. Placez le couvercle à sa position initiale, appuyez et bloquez-le.
- 9. Remontez les filtres.
- 10. Replacez les paniers.
- Remarque :
- Rangement de l'appareil en cas d'inactivité
- Préparation de l'appareil pour l'hiver
- Dépannage
- Service à la clientèle
- Déclaration de la garantie limitée du produit
- LISEZ ET CONSERVEZ CES INSTRUCTIONS
32
Time Remaining Power Beam
®
(Optical
display while the wash cycle is running)
While wash cycle is running, an optical display (time
remaining alternating with cycle indicator images) is
projected onto the floor under the appliance door.
You can set the Time Remaining Power Beam
®
on or off.
All time remaining displays
Using the Star Speed
®
cycle
1.
Open the door and press the ON/OFF button (
2.
Press the Star Speed
®
button. The dishwasher should
be empty and without detergent for the preheating
period.
3.
Press the Start button )* and close the door to
begin preheating. The Time Remaining PowerBeam
®
will project an image of a thermometer alternating with
the time remaining for preheat. Once the time
reamining counts down to 0:00, the Time Remaining
PowerBeam
®
will project an animation of dishes
stacking, indicating that it’s time to load the dishes.
4.
Open the door to begin loading dishes for the first Star
Speed
®
wash. (Load dishes within an hour once the
preheating is finished).
5.
Add detergent (use powder or liquid detergent – do
not use tablets in this cycle), press Start button )*
and close the door within 4 seconds.
6.
The Time Remaining PowerBeam
®
will now show the
time remaining.
7.
When the cycle is done, the Time Remaining
PowerBeam
®
will turn off.
8.
The next Star Speed
®
cycles can run without any
preheating (maximum of 60 minutes in between
cycles).
Wash cycle end
The wash cycle has ended when “Finished” is indicated
on the digital display(s).
Switching off the appliance
Short time after the end of the wash cycle:
1.
Press On/Off button (.
2.
Remove the dishes when they have cooled down.
9 WARNING
RISK OF INJURY
To avoid risk of injury, always use caution when
opening the door during or following a wash cycle
as hot water or steam may escape. Do not fully
open the door until water noises have stopped and
steam has subsided.
Interrupting the wash cycle
9 CAUTION
Expansion (overpressure) may cause the appliance
door to open and/or water to escape! If the door
was opened on an appliance which has a hot water
connection or is heated, always leave the door ajar
for several minutes and then close.
1.
Open the door.
2.
Switch off On/Off switch (.
The LED’s go out. The wash cycle is saved.
3.
To continue the wash cycle, switch on the On/Off
switch ( again.
4.
Close the door.
Note: Your dishwasher is protected against unintentional
operation. If the appliance door remains open for more
than 4 seconds after pressing the Start button, the
operation will be paused. Press the Start button again
and close the appliance door.
Cancel a cycle (reset)
1.
Open the door and press and hold the Start button
)* for approximately 3 seconds until the digital
display @ shows: "Program was terminated".
2.
Close the door.
3.
Wait about 1 minute while the dishwasher drains.
4.
Open the door and press the On/Off switch (.
Changing the wash cycle
When the Start button ( has been pressed, the wash
cycle cannot be changed. The only way a wash cycle can
be changed is by terminating the wash cycle (Reset).
Pre-wash
Cleaning
Rinsing
Drying