Home Connect Installation Guide

Step 2.1: Connect your refrigerator to your
WLAN home network (Wi
-Fi) with WPS
Please enter step 2.1 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the button to open the Settings menu.
2 | Use the
(
button to move to the menu item Appliance
settings.
3 | Press the
button.
4 | Use the
(
button to move to the menu item Home network.
5 | Press the
:
button.
(
)
;
:
Home network
Not connected
EditBack
5
The following message appears on the control panel of your
refrigerator: Start app.
6 | Follow the instructions on the control panel of your refrigerator.
7 | At the step Network connection select Automatically (WPS)
by pressing
.
)
;
8
Network connection
ConfirmBack
Automatically
(WPS)
7
The following message appears on the control panel of your
refrigerator: Press WPS button on your router during the
next 2minutes.
8 | Within the next two minutes, press the WPS button on your
router.
The following message appears on the control panel of your
refrigerator when the connection was successful: Network
connection successful
8
Confirm
Network connection
successful
The app will get notied once your refrigerator has been
successfully connected to your WLAN home network (Wi-Fi).
9 | Follow the instructions in the app.
Information:
If the connection could not be established within
2minutes, make sure your refrigerator is within the
range of your WLAN home network (Wi-Fi).
For some appliances the WPS mode is also called
"automatic mode".
EN5