Home Connect Installation Guide

Step 2.2: Connect your refrigerator to your
WLAN home network (Wi-Fi) step-by-step
Please enter step 2.2 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the button to open the Settings menu.
2 | Use the
(
button to move to the menu item Appliance settings.
3 | Press the
button.
4 | Use the
(
button to move to the menu item Home network.
5 | Press the
:
button.
(
)
;
:
Home network
Not connected
EditBack
5
The following message appears on the control panel of your
refrigerator: Start app
6 | Follow the instructions on the control panel of your refrigerator.
7 | At the step Network connection select Manually by pressing
to start the manual network connection.
;
8
Network connection
ConfirmBack
Manually
)
7
The following message appears on the control panel of your
refrigerator: Continue with manual network connection in
the app
8 | Press the
button.
The appliance will open a temporary Wi-Fi network,
"HomeConnect" with the password "HomeConnect" for
2minutes.
To connect your refrigerator to your WLAN home
network (Wi-Fi), the app will use this temporary Wi-Fi
network to transfer the name (SSID) and the password
of your WLAN home network (Wi-Fi) to your refrigerator.
9 | Follow the instructions in the app.
The following message appears on the control panel of your
refrigerator: Network connection successful
10 | Follow the instructions in the app.
Information:
For some appliances the step-by-step mode is also
called "SAP mode" or "manual mode".
If the step-by-step mode does not work please check:
- Your appliance is in the range of the WLAN home
network (Wi-Fi).
- Your smartphone/tablet is connected to your WLAN
home network (Wi-Fi).
- Your smartphone/tablet and appliance are connected
to the same WLAN home network (Wi-Fi).
EN6