Home Connect™ Guide

Step 2.1: Connect your appliance to your
home network with WPS
Please enter step 2.1 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the Settings button on your appliance and use the
or
button to navigate to HomeConnect.
Install with Enter
1
Home Connect
Installation
TIMERS SETTINGS
ENTER
2 | Press Enter to continue.
3 | Press Enter to conrm the precondition.
Continue with Enter
3
You need to have installed the Home
Connect app and set up a Home
Connect account.
TIMERS SETTINGS
ENTER
4 | Activate the WPS function on your home network router
within the next 2 minutes.
The following message appears in the display of your
appliance: Network connection successful. Continue
with connecting to app.
Press Enter to connect to app
TIMERS SETTINGS
ENTER
Network connection successful.
Continue with connecting app.
The app will get notied once your appliance has been
successfully connected to your Wi-Fi network.
5 | Press Enter to continue.
6 | Follow the instructions in the app.
Information:
If the connection could not be established within
2 minutes, make sure your appliance is within the
range of your Wi-Fi network.
For some appliances the WPS mode is also called
"automatic mode".
EN5