Manual

en-us Basic settings
20
Basic settings
Basic settings
Basic settings
You can configure your appliance to meet your needs.
Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features of
your appliance.
Basic settings
Menu item Description Settings
Home Connect →"HomeConnect® ", Page21
1 Temperature unit ¡ °F
1
¡ °C
2 Display brightness ¡ High
1
¡ Medium
¡ Low
3 Volume ¡ High
1
¡ Medium
¡ Low
¡ Off
4 Clock mode ¡ 12-hour/12HR
1
¡ 24-hour/24HR
5 Auto convection conversion
Decreases the set oven temperature by 25°F for convection bake and convection multi-
rack/true convection heating modes.
¡ On
¡ Off
1
6 Button beep
Tone when a button is pressed.
¡ On
1
¡ Off
7 Standby clock display ¡ On
1
¡ Off
8 Language ¡ EN
1
¡ FR
9 Temperature offset
Sets the temperature offset value for bake, convection bake, roast, convection roast and
convection multi-rack/true convection. When an offset value is entered, the actual oven
temperature is increased or decreased by this value. This feature is useful if food is ei-
ther too brown or too light.
Between +/- 35°F (+/- 19°C) in 1° incre-
ments
0
1
1
Factory setting (may vary according to model)
Changing the basic settings
1. Press SETTINGS.
a The display shows "HOME CONNECT SETTINGS".
2. Press SETTINGS to enter the settings menu.
3. Press SETTINGS to cycle through the settings list.
4. Press ENTER to access the menu for a setting.
5. Enter the desired value with the numeric keypad.
a The new value is automatically accepted as the dis-
play reverts from edit mode back to standby mode.
6. Press CLEAR/OFF to leave the basic settings menu.
Oven temperature offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or
darker.
¡ When an offset temperature is selected, the actual
oven temperature is raised or lowered by this value.
¡ Do not use residential oven thermometers to evaluate
oven temperatures as they will fluctuate throughout
cooking.
¡ You can set a temperature offset in the basic settings
menu. Repeat the process until a satisfactory result is
achieved. Each time you enter the temperature offset
in the basic settings menu, the temperature offset is
restored to zero and you can set a new value.
Auto convection conversion
Convection bake and convection multi-rack modes re-
quire a 25°F reduction in temperature. Auto convection
conversion reduces the temperature you enter automati-
cally.
¡ Simply enter the package or recipe temperature when
setting the mode. The control calculates the correct
temperature and it is shown in the display.