Manual

en-us Cleaning and maintenance
30
5.
CAUTION-Risk of injury! The door is heavy.
▶
Do not grip the door by the handle.
▶
Use both hands to firmly grip it by the sides.
Maintaining the door angle, lift the door straight up
approximately 3/4" (2cm) to unhook the hinges from
the slots and then pull it out towards you until the
hinges are clear of the oven housing.
6. Place the door in a convenient and stable location.
Do not lay the door on its handle. This could cause
dents or scratches.
Reinstalling the oven door
1. Hold the door firmly in both hands. Grip it on either
side, not by the handle.
2. Tilt the door back slightly towards you until it opens
about 7" (18cm) at the top.
3. Slide the hinges into the slots as far as they will
go and lower the door straight down ⁠.
The angle of the door may need to be adjusted
slightly to allow the hinges to engage properly and
the door to lower into place. The door should lower
about 3/4" (2cm) and stop. If it does not, the hinges
have not engaged properly and the door could fall if it
is released.
4. Once both hinges are fully engaged, gently open the
door until it is fully open.
5. Push the levers on both the hinges up and forward
until they are locked into the slot and flush with the
front of the oven body.
6. Close and open the door slowly to be sure it is cor-
rectly and securely in place.