Manual

Table Of Contents
en-us Eliminating faults
32
Fault Cause Troubleshooting
"E" and a number appears in display and
control beeps
An electronics fault has occured 1. Press any key to stop the beeping.
2. Reset the oven if necessary.
3. Call an authorized service provider.
With a new oven there is a strong odor
when oven is turned on
This is normal with a new oven and will dis-
appear after a few uses
Operate the self clean mode to burn-off the smell more
quickly.
Control does not react when a key is
touched
The control is wet or soiled
Clean the control panel an wipe it dry.
The buttons are not pressed correctly 1. Press the center of the button.
2. Use the flat part of your finger.
Warm air or steam escapes from oven vent It is normal to see or feel steam or warm air
escaping from the oven vent
CAUTION
Risk of fire!
The oven vents are important for air circula-
tion. Covering the oven vents will cause the
oven to overheat. Refer to the appliance over-
view for the location of the oven vents.
→"Familiarizing yourself with your appliance",
Page11
Do not obstruct oven vents.
Cooling fan runs even when the oven is
turned off
The cooling fan will continue to run, even
after the oven has been turned off, until the
oven has cooled sufficiently
This is normal. There is no action required.