Product Spec Sheet

Page 3 of 3
These warranties give you specific legal rights and you may have other rights that vary from state to state. Limited warranty from date of purchase. For complete warranty details, refer to your
Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2020 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
09 / 20
ME302YP
30-INCH DOUBLE BUILT-IN OVEN
MASTERPIECE
®
SERIES WITH PROFESSIONAL HANDLE
INSTALLATION DETAILSINSTALLATION DETAILS
measurements in inches (mm)
Wall oven junction box may be located
above or to the right or left of the unit within
reach of the power cable.
*
**
Electrical hook-up may be located below
(depending on space) or next to the drawer
within reach of the power cable.
Minimum
3
/
4
" (18 mm) required between
cut-outs.
min. 4
3
/
4
"
max. 18"
(121-457 mm)
Standard installation
Single oven, double oven or combo oven over warming or storage drawer
Single oven,
double oven
or combo oven
cut-out height
(597 mm)
(724 mm)
(235 mm)
23
1
/
2
"
28
1
/
2
"
9
1
/
4
"
*
**
measurements in inches (mm)
Wall oven junction box may be located
above or to the right or left of the unit within
reach of the power cable.
*
**
Electrical hook-up may be located below
(depending on space) or next to the drawer
within reach of the power cable.
Minimum
3
/
4
" (18 mm) required between
cut-outs.
min. 4
3
/
4
"
max. 18"
(121-457 mm)
Standard installation
Single oven, double oven or combo oven over warming or storage drawer
Single oven,
double oven
or combo oven
cut-out height
(597 mm)
(724 mm)
(235 mm)
23
1
/
2
"
28
1
/
2
"
9
1
/
4
"
*
**
measurements in inches (mm)
Wall oven junction box may be located
above or to the right or left of the unit within
reach of the power cable.
*
**
Electrical hook-up may be located below
(depending on space) or next to the drawer
within reach of the power cable.
Minimum
3
/
4
" (18 mm) required between
cut-outs.
min. 4
3
/
4
"
max. 18"
(121-457 mm)
Standard installation
Single oven, double oven or combo oven over warming or storage drawer
Single oven,
double oven
or combo oven
cut-out height
(597 mm)
(724 mm)
(235 mm)
23
1
/
2
"
28
1
/
2
"
9
1
/
4
"
*
**
minimum
1
/
2
" (13 mm) required between
cut-out*
measurements in inches (mm)
Cleats
Double or
combo oven
cut-out height
(25 mm)
Flush installation
Double or combo oven over storage or warming drawer
Side View
(243 mm)
*
IMPORTANT: Base has to be able to support
the weight of the oven. Please check oven
manual for minimum weight requirements.
flush
cutout
height
**
For WD30W, the installed dimension may differ.
This drawing based on a
3
/
4
" (19 mm) thick
custom panel.
Warming drawer
(622 mm)
Cleats
**24
1
/
2
"
9
9
/
16
"
1"
minimum
1
/
2
" (13 mm) required between
cut-out*
measurements in inches (mm)
Cleats
Double or
combo oven
cut-out height
(25 mm)
Flush installation
Double or combo oven over storage or warming drawer
Side View
(243 mm)
*
IMPORTANT: Base has to be able to support
the weight of the oven. Please check oven
manual for minimum weight requirements.
flush
cutout
height
**
For WD30W, the installed dimension may differ.
This drawing based on a
3
/
4
" (19 mm) thick
custom panel.
Warming drawer
(622 mm)
Cleats
**24
1
/
2
"
9
9
/
16
"
1"