Installation instructions

Table Of Contents
6
Preparation
Model Numbers Covered in this Manual
Before you Begin
Tools and Parts Needed
#2 Phillips head screwdriver (to install trim screws).
T20 Star-head screwdriver (to remove shipping
screws).
1/8” drill bit and drill (to drill pilot holes for trim
screws).
Measuring tape.
Gloves and long sleeves are recommended (to help
protect hands and arms from scratches).
Parts Included
Phillips head screws (6).
Power Requirements
The junction box must be properly grounded in
accordance with all applicable codes.
Model Type Series
ME301WS Single Oven Masterpiece
MED301WS Single Oven Masterpiece
MED301LWS Single Oven Masterpiece
MED301RWS Single Oven Masterpiece
PO301W Single Oven Professional
POD301W Single Oven Professional
POD301LW Single Oven Professional
POD301RW Single Oven Professional
ME302WS Double Oven Masterpiece
MED302WS Double Oven Masterpiece
MED302LWS Double Oven Masterpiece
MED302RWS Double Oven Masterpiece
PO302W Double Oven Professional
POD302W Double Oven Professional
POD302LW Double Oven Professional
POD302RW Double Oven Professional
MEM301WS
Combination Oven
with Microwave
Masterpiece
POM301W
Combination Oven
with Microwave
Professional
MEDMC301WS
Combination Oven
with Speed Oven
Masterpiece
PODMC301W
Combination Oven
with Speed Oven
Professional
MEDMCW31WS
Triple Oven with Speed
Oven and Warming
Drawer
Masterpiece
PODMCW31W
Triple Oven with Speed
Oven and Warming
Drawer
Professional
MEDS301WS
Steam and Convec-
tion Oven
Masterpiece
PODS301W
Steam and Convec-
tion Oven
Professional
MEDS302WS
Combination Oven
with Steam and Con-
vection Oven
Masterpiece
PODS302W
Combination Oven
with Steam and Con-
vection Oven
Professional