Quick Start Guide

16
Testing Operation
1. Turn on power at the breaker.
2. Test the oven mode.
Select the BAKE mode. See the Use and Care Manual
for detailed operation instructions.
3. Verify that the oven light comes on and the oven
begins to preheat.
4. Test the door lock.
Set the SELF CLEAN mode. Confirm that the door
locks when the lock icon appears in the display.
5. If installing a double oven, test the second oven as
well.
6. If any of the tests do not result as explained above,
contact service for assistance. Otherwise, the
installation is complete at this time.
Service
Before Calling Service
Do not remove rating label as it may void the product
warranty.
Single Oven-Side Hinge
The rating labels (A) are opposite the door hinge. For left
hinge doors, the rating labels will be on the door trim on
the right hand side of the door. For right hinge doors, the
rating labels will be on the door trim on the left hand side
of the door.
Rating Label Location
Model Number and FD Number
The model number and the FD number of your appliance
are found on the rating label. Make a note of these
numbers in the space below to save time in the event
your appliance requires service.
Keep your invoice or escrow papers for warranty
validation if service is needed.
Single Oven-Bottom Hinge
The rating labels (A) are located on the left hand side of
the door trim.
Rating Label Location
Model Number and FD Number
The model number and the FD number of your appliance
are found on the rating label. Make a note of these
numbers in the space below to save time in the event
your appliance requires service.
Keep your invoice or escrow papers for warranty
validation if service is needed.
A Rating Label
Model # FD #
Thermador
Customer Support
800-735-4328
$
A Rating Label
Model # FD #
Thermador
Customer Support
800-735-4328
$