PCG486NL Specifications

Page 4 of 4
11 / 15
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
ELECTRICAL AND GAS LOCATIONS
The gas and electrical supply must be located in an area that is accessible without requiring
removal of the rangetop. The appliance electrical power cord and gas pipe connection are located
on the left rear underside of the rangetop.
The junction box must be located within 3 feet (~900 mm) of the rangetop connection.
NATURAL GAS REQUIREMENTS:
Inlet Connection:
1
/
2
" NPT (min.
3
/
4
" dia. ex line)
Supply Pressure: 6" min. to 14" max. water column (14.9 mb to 34.9 mb)
Manifold Pressure: 5" water column (12.5 mb)
PROPANE GAS REQUIREMENTS:
Inlet Connection:
1
/
2
" NPT (min.
3
/
4
" dia. ex line)
Supply Pressure: 11" min. to 14" max. water column (27.4 mb to 34.9 mb)
Manifold Pressure: 10" water column (24.9 mb)
PCG486NL
48-INCH GAS RANGETOP WITH GRILL
PROFESSIONAL SERIES, PORCELAIN COOKTOP SURFACE
ELECTRICAL SUPPLY
IMPORTANT: The cord supplied
with gas rangetops having a grill
requires a NEMA 5-20 receptacle
as shown here. Local codes my
require a different wiring method.
WARNING: This appliance is equipped with a three-prong grounding
plug for protection against shock hazard and should be plugged
directly into a properly grounded receptacle. DO NOT cut or remove
the grounding prong from this plug. DO NOT ALTER THIS PLUG.
NEMA 5-20
RECEPT
ACLE
PLUG