Installation instructions

Installation Instructions English 8
Figure 2: Installation Clearances with a Low Backguard
as defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12” (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.
Combustible
Materials
28" (711 mm)
27¼" (692 mm)
36" (914 mm) min.
to combustible
materials
24" (610 mm)
max. recess depth
Combustible
Back Wall
35 ¾" (908 mm) Min.
37 ¼" (946 mm) Max.
23" (584 mm)
44⅞ " (1140 mm)
Total Clearance
Installation Clearances with Low Backguard
9" (229 mm)
9" (229 mm)
9" (229 mm)
Low Back
24⅝" (625 mm)
24¾" (629 mm)