Instructions for Use
Table Of Contents
- Home ConnectTM user’s information
- Table of
- Safety
- Safety
- Description
- Before you begin
- Using the rangetop
- Using the oven
- Getting the most out of your appliance
- Home Connect®
- Care and maintenance
- Do-it-yourself maintenance
- Oven light bulb replacement
- Before calling for service
- Statement of limited product warranty
- Table des
- Définitions de
- Sécurité
- Description
- Avant de commencer
- Utilisation de la table de cuisson
- Tirer le meilleur parti de l’appareil
- Utilisation du four
- Symboles et descriptions
- Configuration initiale
- Réglage du four
- Kitchen timer (minuterie cuisine)
- Oven timer (minuterie de four)
- End timer (fin de la minuterie)
- Fast preheat (préchauffage rapide)
- Panel lock (verrouillage panneau commande)
- Conversion de convection
- Réglage précis du four (décalage de température)
- Probe (sonde thermique)
- Sabbath (Sabbat)
- Remote start (démarrage à distance)
- Home Connect®
- Entretien et nettoyage
- Blank Page
46
Manually registering your appliance in the
home network
1. Press SETTINGS and select HOME CONNECT.
2. Press ENTER.
If no network has been established, the Home
Connect assistant will guide you.
3. Press ENTER to select the Home Connect assistant.
4. Follow the instructions in the app.
5. Wait until “NETWORK CONNECTED” is shown on the
display.
The connection may fail. The display will alert you to
try again or connect automatically.
The appliance is ready to connect to the app.
6. Follow the instructions of the app on your mobile
device for automatic network registration.
The process for registering is completed once
“PAIRING SUCCESSFUL” is shown in the display.
Connect your appliance to your home
network with WPS
1. Press SETTINGS and select HOME CONNECT.
2. Press ENTER.
-- A request to press the WPS button on the router
within 2 minutes appears in the display.
3. Press the WPS button on your router.
-- Please consult your router's manual to locate the
WPS button.
-- The app will get notified once your appliance has
been successfully connected to your Wi-Fi
network.
4. Press ENTER.
-- A message will appear in the display informing the
user if the network was connected successfully.
5. Press START PAIRING in the Home Connect app.
6. Follow the directions in the app.
Remote start
If you want to start an oven operation using your mobile
device, you must activate remote start.
9WARNING
Risk of injury
REMOTE OPERATION This appliance is configurable
to allow remote operation at any time.
Do not store any flammable materials or temperature
sensitive items inside, on top or near surface units of
the appliance.
Notes
• For some models a permanent Remote start can be
activated via the Home Connect app. This function
allows a remote start of the available operating modes
without automatically deactivating Remote start.
• Remote start can only be activated if the Home
Connect setup has been successfully completed.
• Some operating modes can only be started on the
oven itself.
Setting remote start
•Select REMOTE START.
Remote start is automatically deactivated 24 hours
after remote start has been activated. When you start
the oven operation on the appliance, remote start is
automatically activated. You can therefore make
changes from your mobile device or start a new
operation.
appears in the display.
Home Connect settings
Adapt Home Connect to your needs.
You can find the Home Connect settings in the basic
settings for your appliance. Which settings the display
shows will depend on whether Home Connect has been
set up and whether the appliance is connected to your
home network.
Activating or deactivating Wi-Fi
You can use the Home Connect functions, if Wi-Fi is
activated.
1. Press SETTINGS to cycle through available options
until “HOME CONNECT SETTINGS” is displayed.
2. Press ENTER.
3. Press SETTINGS to cycle through available options
until “WI-FI ON” or “WI-FI OFF” is displayed.
4. Press ENTER.
5. Press 0 for turning Wi-Fi off, or 1 for turning Wi-Fi on.
“DEACTIVATING WI-FI” or “ACTIVATING WI-FI” is
displayed.