Specifications

PRD366WGU
36-INCH DUAL-FUEL PRO GRAND
®
RANGE
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
Page 2 of 6
ACCESSORIES (OPTIONAL)
ACCESSORIES (INCLUDED)
3 Telescopic Racks, Multi-Point Meat Probe, 1 Lg Broil Pan, Island Trim
11 / 18
COMING
SOON
PA36WLBG
7" Low Back Backguard*
PA12CHPBLK
Chopping Block / Cutting Board
PALPKITHW
LP Conversion Kit Dual-Fuel Pro Ranges and Rangetops
(4 & 6 Burner)
PWOKRINGHC
Wok Ring
PAKNOBLUWG
Metallic Blue Knob Kit
Contact Customer Support
Propane Gas or Dual-Fuel Models Connected to LP Gas
from 10,000 ft.–10,200 ft.
COMING
SOON
PA36WTKG
Toekick
PAGRIDDLE
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
PAALTKITGW
Natural Gas Models from 5,400 ft.–10,200 ft.
* Models PCG305xx, PRD305xx, and PRD606xx are suitable for 0" rear clearance to combustible surfaces. All other models: when using the included Island Trim a minimum 6" (152 mm) rear
clearance is required to a combustible surface. When installing against a combustible surface, a Thermador
®
Low Backguard is required for a 0" rear clearance to the combustible surface. A
Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or stone) is 0" when using the
included Island Trim. Clearances of less than 6" (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. Clearances from non-combustible materials are
not part of the ANSI Z21.1 scope and are not certified by CSA.