Product Spec Sheet

PRD606WCSG
60-INCH DUAL-FUEL PRO GRAND
®
RANGE WITH STEAM,
GRILL AND GRIDDLE
PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE
Page 2 of 6
ACCESSORIES (OPTIONAL)
ACCESSORIES (INCLUDED)
3 Telescopic Racks, 1 Sm. Std. Rack, Multi-Point Meat Probe, 1 Griddle Plate, 1 Grease Tray, 2 Grill Grates, 1 Bx. Ceramic Briquettes, 1 Steam Pan, 2
Lg Broil Pan, Island Trim
11 / 18
COMING
SOON
PABRICKBKW
Flat Ceramic Briquettes with Basket
PA60WLBG
7" Low Back Backguard*
PAGRIDDLEW
12" Pro Griddle Plate (for Briquette Grill Models),
Fusion Coating
PA12CHPBLK
Chopping Block / Cutting Board
PALPKITHW
LP Conversion Kit Dual-Fuel Pro Ranges and Rangetops
(4 & 6 Burner)
PA12LCVRW
12" Professional Griddle Cover
PWOKRINGHC
Wok Ring
PAKNOBLUWG
Metallic Blue Knob Kit
PA12GRILFW
12" Grill Plate with Tray (for Griddle Models),
Fusion Coating
PA12GRILLW
12" Pro Grill Plate with Tray, (for Griddle Models),
Non-Fusion Coating
Contact Customer Support
Propane Gas or Dual-Fuel Models Connected to LP Gas
from 10,000 ft.–10,200 ft.
CS2XLH
Cooking Pan, Full Size, 1
5
/
8
" Deep
CS2LH
Baking Tray, Full Size, 1
1
/
4
" Deep
CS1XLPH
Perforated Cooking Pan, Half Size, 1
5
/
8
" Deep
PA24CVRW
24" For Grill / Griddle Combination Models
COMING
SOON
PABRICKW
Flat Ceramic Briquettes without Basket
PA60WTKG
Toekick
PAGRIDLFW
12" Pro Griddle with Tray, (Fusion Coating Option
for Griddle Models)
PAGRIDDLE
Professional Griddle, Sits on Top of Grates Over
2 Star Burners, High-Release Coating
PAALTKITGW
Natural Gas Models from 5,400 ft.–10,200 ft.
CSRACKH
Wire Rack
CS2XLPH
Perforated Cooking Pan, Full Size, 1
5
/
8
" Deep
CS1XLH
Cooking Pan, Half Size, 2
1
/
2
" Deep
PA12LCVRN
12" Professional Indoor Grill Cover
* Models PCG305xx, PRD305xx, and PRD606xx are suitable for 0" rear clearance to combustible surfaces. All other models: when using the included Island Trim a minimum 6" (152 mm) rear
clearance is required to a combustible surface. When installing against a combustible surface, a Thermador
®
Low Backguard is required for a 0" rear clearance to the combustible surface. A
Thermador Low Backguard must be purchased separately. A rear clearance to a surface covered in a noncombustible material (metal, ceramic tile, brick, marble, or stone) is 0" when using the
included Island Trim. Clearances of less than 6" (152 mm) should be approved by the local codes and/or by the local authority having jurisdiction. Clearances from non-combustible materials are
not part of the ANSI Z21.1 scope and are not certified by CSA.