Installation Instructions

Page. 11
Side clearances
• The model shown is with the included island trim. A
low backguard option is available (purchased
separately).
• For an island trim install, counter surface should have
a cantilever edge meeting the back section of the
island trim.
• If an inner wall is used under the cantilever counter
top there should be a 1/8'' (3 mm) gap from the rear
of the range.
• There is a 44-7/8'' (1,140 mm) total clearance.
• Shaded area behind range indicates minimum
clearance to combustible surfaces. Combustible
materials cannot be located within this area with the
Island Trim.
• There is a 23-7/8'' (606 mm) maximum recess depth.
28" (711)
23
⅞" (606)
23" (584)
44 ⅞" (1,140)
24 ⅝" (625)
24
¾" (629)
30" (762) –
36" (914)
36
¾" (933) –
35
⅞" (911)
6" (152) 6" (152) 6" (152)
inches (mm)