Installation guide

7. Preparing to connect the water

(only for appliances which require a water connection)

8. Attaching the edge protection

Turn off the main water tap to prevent damage

caused by leaking water.

Attach the connecting pipe to the shut off valve

according to the instructions supplied by the

manufacturer of the ice maker installation kit.

Install the connecting pipe. Always observe the

indicated gap dimensions to prevent damage to the

connecting pipe when pushing in the appliance.

C3 To protect the corners of the installation cavity,

attach the supplied protective brackets with

adhesive tape.

9.Side-by-Side installation

[_lf a side by side installation is intended,

now connect the two appliances together.

See the Installation Manual for the Side by Side kits.

C3 Attach the connecting pipe to the floor with

adhesive tape.

10. Pushing the appliance into the installation cavity