Installation guide

20. Attaching the furniture door
[_Now fit the furniture handles which are screwed
from behind!
Hang the furniture door with adjusting rail over the
double threaded bolts.
Screw the nuts a little onto the double threaded
bolts. Do not tighten!
Precisely adjust the furniture door.
To do this, insert the bracket directly behind the
furniture handle into the associated fixing plate.
Slide the bracket onto the screw on the appliance
door and tighten.
Align the furniture door with the double threaded
bolts (Torx screwdriver). Then loosen the bracket
screw again.
Attach the bracket:
Lift the furniture door slightly away from the
appliance door.
Push the side bracket (_.) on the left and right
over the screws.
Insert the side bracket (_2_.)on the left and right
into the fixing plate and slide over the screw.
Slowly lower the door.
Continue the process until the last side brackets
(_.) have been inserted into the fixing plates and
are positioned on the screws.
lil The two upper brackets (_. on the left and right)
have no side piece for insertion into the fixing plate.
Close the door and check that the depth of the
furniture front is aligned with the adjacent fronts.
If required, correct.
Tighten the bracket screws to fix the depth
alignment.
Close the door and check the side alignment.
Correct by gently tapping the edge of the open
furniture door with your hand.
29