Installation guide

Tighten the nuts on the adjusting rail. This wilt fix the

side alignment of the door.

[_The number of lower brackets depends on the width

and the design of the furniture door.

21. Shorten the finger guard

[3 Hold the finger guard at the side of the open door.

[_The recesses on the finger guard must be situated

exactly at the height of the brackets!

[3 Screw on the lower brackets. Predritt holes in the

furniture door!

The lower bracket fixes the side position of the door.

1. Loosen the screw.

2. Check the side position of the door.

3. Screw in the wooden screw.

4. Tighten the screw.

5. Put the cover on the brackets.

[3 Transfer the door dimensions to the finger guard.

[3 Using a knife and steel ruler, shorten the finger

guard to the required length.