Installation guide

25. Adjusting the door opening

angle

Depending on the installation situation, it may be

necessary to adjust the door opening angle. A door

opening angle of 115 ° has been set at the factory.

To adjust the door opening angle to 90°:

[3 Open door to 90 ° .

C3 Insert the cover strip into the space between the

appliance and the wooden panel (individual

appliances only).

24. Mounting of air separator

Screw the air separator to the furniture door in order to

separate the supply and waste air.

C3 Shorten the air separator to the required length.

C3 Attach the air separator with the 2 clamps.

Align the air separator with the center line of the

door as illustrated in the diagram.

[_For appliances with ice water dispenser:

The air separator must be cut out in the area of the

hose.

[3 Insert the banking pin through the borehotes which

are now vertically aligned and drive in with

a hammer.

26. Changing the door spring

To adjust the door spring:

Rotate the adjusting screw with a cross head

screwdriver.

I = maximum spring tension

0 = no spring tension