Installation guide

(3
(3
Fix the attachment plate side lugs (top) depending
on the installation situation. If there is no gap or only
a slight gap, it is not necessary to fix the side lugs.
If there is a fairly large gap above the appliance, fit a
wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.
14.
(3
Attaching the individual
appliance to the side of
the cavity
Screw the attachment plate lugs (side) to the
adjacent furniture/fixtures (individual appliances
only).
15. Connecting the water to the
appliance
IT] When connecting the water pipe to the solenoid
valve of the appliance, follow the instructions
supplied by the manufacturer of the ice maker
installation kit enclosed with the installation manual.
When bending the water pipe, do not kink it,
otherwise there is a risk of leaks and water damage.
Use bending aids.
I_ Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
28