Installation guide

23. Attaching the furniture door
NOTE
Now fit the furniture nandies which are screwed from
behind!
@ Hang the furniture door with adjusting rail over tne
double threaded bolts (1.).
m= Raise furniture door slightly and push the fixing rip down
over the fixing brackets (2.).
m Remove fixing bracket on the handle side from
the appliance coor. To do this, loosen the fastening
SCrews only.
m Insert removed fixing brackets into the fixing rio and
push over the fastening Screws.
m Screw the nuts a little onto the double threaded bolts.
Do not tighten!
m Loosen fixing bracket on the hinge side and pull slightly
off the appliance door. To do this, loosen the fastening
SCrews only.
Open the appliance door.
Hang the furniture door with adjusting rail over the
double threaded bolts.
34