Installation Instructions
Table Of Contents
- Safety 2
- Installation Instructions 3
- THERMADOR® Support back page
- Safety
- Installation Instructions
- Table des
- Définitions de
- Sécurité
- INSTALLATEUR : Prière de laisser ces instructions d’installation avec cet appareil à l’intention du propriétaire. Montrez au propriétaire l'emplacement du disjoncteur ou du fusible. Identifiez sa position pour pouvoir le retrouver facilement.
- AVERTISSEMENT
- AVERTISSEMENT
- AVERTISSEMENT
- MISE EN GARDE
- AVERTISSEMENT
- Installation Standard
- Índice de
- Definiciones de
- Seguridad
- Montaje independiente
Page. 5
5. Secure the Left Side Mounting Bracket to the Base
Plate using three (3) T-20 x
½'' Torx head screws.
6. Center the Base Plate in the cabinet cavity using the
center locating notch. Secure the Base Plate to the
cabinet floor with six (6)
¾” wood screws.
7. Secure the Left Side Mounting Bracket to the Left
Cabinet Mounting Bracket at the top left of the
cabinet using one (1) T-20 x
½'' Torx head screw.
8. Set the Coffee Maker Transformer behind the Base
Plate. Install and plug transformer according to the
Coffee Maker instructions.
9. Plug the transformer plug into the back of the coffee
maker, as instructed in the Coffee Maker Installation
Instructions. Slide coffee maker in cabinet on top of
the Base Plate and move coffee maker to the left so
the left side is flush with the Left Support Bracket.
10. Open the coffee maker door. Secure the Left Support
Bracket from the inside of the coffee maker using six
(6) x 1'' T-20 Torx head screws.
CCC
LL
dia. 1/16"
1