installation instructions
Page. 4
Flush Install Dimensions
NOTE: * Flush installation requires a 5/16'' (8 mm) high x
28
½'' (724 mm) wide x 22½'' (571 mm) deep baseplate
underneath the unit body.
Standard Installation
1. Install the Left Cabinet Mounting Bracket at the top
left of the cabinet opening using two (2) ¾'' Phillips
head wood screws. Ensure the bracket is flush to the
cabinet side and cabinet face.
2. Install the Right Cabinet Mounting Bracket at the top
right of the cabinet opening using two (2) ¾'' Phillips
head wood screws. Ensure the bracket is flush to the
cabinet side and cabinet face.
3. Measure 1
⅝'' (41 mm) from cabinet base and make
mark on both sides of cabinet.
4. Install the Left and Right Side Cabinet Brackets flush
to the cabinet face with two (2) ¾'' Phillips head wood
screws per side. Install side trim mounting bracket so
that the bottom edge of the bracket is aligned with
mark.
*
Top View
Side View
reveal cleats
20
⅛"
(511)
ush
cut-out
height
ush inset
depth
¾" (19)¾" (19)
reveal
cleats
reveal
cleats
1" (25)
1"
(25)
28
½" (724)
30" (762)
19
⅞
" – 23
½
"
(504 – 597)
19
⅞
" – 23
½
"
(504 – 597)
19
⅞
" – 23
½
"
(504 – 597)
19
⅞
" – 23
½
"
(504 – 597)
19
⅞
" – 23
½
"
(504 – 597)
19
⅞
" – 23
½
"
(504 – 597)
inches (mm)
dia. 1/16"
1
2
dia. 1/16"
1
2
1⅝" (41)1⅝" (41)1⅝" (41)
dia. 1/16"
1
2