User's Manual

OvenFeatures Built-inDNOvenCareandUseManual
Oven
GENERAL TiPS
, Placing racks in oven: To insert racks into the even, held the
rack with the back rail up and toward the back. Place the
safety hooks under the front of the rail guides. Push the rack
into the oven, lifting the rack stops over the front of the rail
guides_Slide the rack into position.
, Removing racks from oven: To remove racks or reposition
racks inthe oven,pull the racktoward the front of the oven. Lift
upthe front of the rack over the safety stops and pull from the
oveR,
Place oven racks in desired positions before turning the oven
On.
Oven rack supports should not be removedfrom the oven.
,_CAUTION! Never use aluminum foil to cover the oven
racks or to line the oven. It can cause damage to the oven if
heat is trapped under the foil
When placing food on a rack, pull the rack out to the stop
position.The racksare designed to lockand not tiltwhen pulled
forward.
SELF CLEANSNG THE RACKS
Ifthe racks are left inthe oven during Self Clean,the racks will
lose the shiny finish. See Oven Care and Cleaning
Recommendationson Page51.
Always
remove
before
Setf Clean
Extendable Rack
The ExtendableRack (some models)must be removedbefore
starting the Self Clean mode.
Racks
I _'_ I_l _ _ ....... I
_ I_l_'l_l _l_l,l,l_,l_l _ I _'_ I _ _'_'_l ..... I
Rack
Positions
RACK POS_T_ONS
Rack positions are numbered from the bottom support guide
(#1) to the top (#6). The correct rack position for cooking a
food item depends on the recipe andthe cooking mode.
Refer to the cooking recommendations in this manual for
suggested rack positions.
MULTIPLE RACK COOKING AND
BAKING
Now you can cook acomplete meal using multiple rackswithout
flavor exchange from different foods.
Check that cooking or bakingtemperatures are the same when
cooking different foods at the same time.
Tworacks can be used at one time during BAKE mode,such as
when baking a batch of cookies.
Three racks or more can be used with convection modes.
14