User's Manual

Do-it-YourselfMaintenance Built-inDMOvenCareandUseManual
Oo4t-Yourself Naintenance
Fahrenheit to Cemsius
The oven has been preset to a Fahrenheittemperature.
To change to Celsius, follow these steps:
I. Turn offovens.
.
3.
4.
5.
Touchandholdthe 8TART padandthen the CONVECTIONpad
at the same time for 3 seconds.
'F" appears in the temperature digits; release both pads at the
sametime.
TouchCONVECTION; 'C" replaces 'F." This alternates when
CONVECTIONistouched.
Tocomplete the change,touch 8TART.
Voltage Change Option
The oven has been preset for 240 VAC. If your residence has been
supplied with 208 VAC, the oven voltage can be changed during
installation.
1. Turn both ovens off. TouchOVEN OFF for each oven.
2. Touchand holdthe 8TART pad andthe 8ELF CLEAN padat the
sametime for 3 seconds.
3. "240" appears in the display. Release both pads at the same
time.
4. Touchthe 8ELF CLEAN pad. "240" is replacedwith '208." This
alternateswhen 8ELF CLEAN is touched.
5. To complete the change,touch 8TART.
Calibrating Oven Temperature
The electronic thermostat has been preset to 0°F and accurately
maintains itssetting. Ifthe browning results are too light or too dark
for your preferences, you can raise or lower the setting.
To change calibration of oven temperature for single or
upper ovens:
1. Turn off oven(s).
2. For single oven or upper oven, touch and hold the 8TART pad
and then touchthe BAKE pad.
3. "0" (zero) appears inthe temperature digits; release al! pads at
the same time.
4. Touch BAKE and 0 changes in increments of 5 degrees each
time it is touched. The maximum adjustment is ± 35°F.
5. Tocomplete the change,touch 8TART.
To change calibration of oven temperature for lower oven on
double ovens:
1. Touchthe ROASTpad.
2. Continue with Steps3 through 5, as described above.
NOTE:
The available temperature range for this oven is
10O°F to 550°R This applies to all conventional
cooking modes. Achange in the calibration does
not affect Dehydrate, Proof or Warm modes.
Beep Volume
Thevolumeof the beepscan beadjusted.Touchand holdthe 8TART
padfollowed by the PROBE padfor three seconds. TouchPROBE
padagain to increase ordecrease volume,from levels1to 3. Touch
8TART to setvolume selection.
How to Obtain Service
For authorized service or parts information, phone [phone].
We want you to remain a satisfied customer. If a problem occurs that cannot be resolved to your
satisfaction write to Thermador Customer Support Center,
5551 McFaddenAvenue, Huntington Beach CA, 92649 or call: 1-800-735-4328.
Please include the Model Number, Serial Number, Fabrication Date and Date of Original Purchase and
Installation.
54