Thermedor A, A,o_._c,o.gcon.
,4X IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS. This appliance conforms to the relevant safety regulations. A. Repairs should only be carried out by qualified specialists. B. Improperly executed repairs can give rise to significant hazards for the user. Z_ Your new appliance was protected on its way to you by the packaging. None of the materials cause pollution to the environment and all can be recycled for use again.
PRIOR TO INSTALLATION Step 1' EXHAUST-AIR MODE Step 2: PREPARING THE WALL _.s_Exhaust air should neither be directed into a smoke or exhaust flue that iscurrently used for other purposes, not into a shaft that is used for ventilating rooms in which stoves or fireplaces are also located. [] The wall must be flat and perpendicular. [] Ensure that the wall is capable of providing a firm hold for mounting screws and plugs.
INSTALLATION 1. Hold the fan on the wall. Note the direction of the air conduction. 2. Mark the 4 mounting boreholes. /_ At least one screw must be installed through a stud. /_ The wall plugs must be suitable for the brickwork. 3. Drill the 4 x 1/4"¢ mounting boreholes. Insert wall plugs and screw the fan to the wall. 4. Connect the pipe from the fan to the extractor hood and feed to the outside. 5. Connect the fan to the extractor hood with an extension cable if required. Use the added connector.
WIRE DIAGRAMM speed 4 speed 4 speed 3 speed 3 , speed 2 speed 2 speed 1 speed 1 i mm mm mm 1, 2 1112 C2 ] 111 2 E3 GJ 4-- (u _ I L2 L3 c_ C GJ GJ c_ 1 2 3 4) 5 X8h speed 1 (red) speed 2 (blue) speed 3 (orange) speed 4 (brown) N (white) PE (green/yellow) mm I mm © '1 2 M2 green/yeUow N mm C Z= cJ I PAGE 4 ) L4 • i
5551 McFadden 9000186006 Avenue, Huntington ° 10013 RevB Beach CA, 92649 • 800-735-4328 ° 10/06 © BSH Home Appliances • www.thermador.com Corporation ° Lithe in U.S.A.
