Owner manual

ManualsBrandsThermal Transfer Systems ManualsEquipmentB Series

TTPSales@thermasys.com 262.554.8330 www.thermaltransfer.com

102

FLUID COOLING

Shell & Tube B Series

WATER COOLED B

COPPER & STEEL CONSTRUCTION

Features

Young Touchstone Interchange

Optional Non-Ferrous Construction

Competitively Priced

1/4” or 3/8” Tubes Standard

Water to Water Applications

Sea Water Applications

Optional 90/10 Copper Nickel Cooling

Tubes and Bronze End Bonnets for Sea

Water Service

NPT, SAE O-Ring, SAE Flange, or BSPP

Shell Side Connections Available

End Bonnets Removable for Servicing

Mounting Feet Included (May be

Rotated in 90° Increments)

Ratings

Maximum Shell Pressure 250 psi

Maximum Tube Side Pressure 150 psi

Maximum Temperature 350° F

How to Order

Model Size Selected

Tube

Diameter

Code

4 - 1/4”

6 - 3/8”

Tubeside

Passes

0 - One Pass

T - Two Pass

F - Four Pass

–

Baff le

Spacing

A - 1.125

B - 2.25

C - 4.5

D - 9.0

Shell

Material

Blank - Steel

BR - Brass

Cooling

Tube

Material

Blank - Copper

CN - CuNi

End

Bonnet

Material

Blank - Cast Iron

B - Bronze

Zinc

Anodes

Blank - None

Z - Zinc

– –

–

––

–

Model

Series

SBF

BFM

Materials

Tubes Copper

Hubs & Tubesheets Steel or Brass

Shell Steel or Brass

B a f f l e s B r a s s

End Bonnets Cast Iron

Mounting Brackets S t e e l

Gaskets Nitrile Rubber/Cellulose Fiber

Nameplate Aluminum Foil

Steel Hub

SB = NPT Shell Side, NPT Tube Side

SBF = SAE Flange (with UNC threads) Shell Side connections; NPT Tube Side connections

Brass Hub

B = NPT Shell Side connections; NPT Tube Side connections

BS = SAE O-Ring Shell Side connections; NPT Tube Side connections

BM = BSPP Shell Side connections; BSPP Tube Side connections

BF = SAE Flange (with UNC threads) Shell Side connections; NPT Tube Side connections

BFM = SAE Flange (with Metric threads) Shell Side connections; BSPP Tube Side connections

SAE ﬂanges available on some models. Consult factory for details.

ADD FOR B SERIES MODELS ONLY:

BR-CN-B-Z is to be used for all seawater/dirty water applications.

Summary of content (6 pages)

PAGE 1
FLUID COOLING | Shell & Tube B Series Copper & Steel Construction Features Young Touchstone Interchange n Optional Non-Ferrous Construction n Competitively Priced n 1/4” or 3/8” Tubes Standard n Water to Water Applications n Sea Water Applications n Optional 90/10 Copper Nickel Cooling Tubes and Bronze End Bonnets for Sea Water Service n NPT, SAE O-Ring, SAE Flange, or BSPP Shell Side Connections Available n End Bonnets Removable for Servicing n Mounting Feet Included
PAGE 2
Dimensions One Pass GG Z (4 places) M HH Q P N B K C A E L D H (2 each end) G Flange Size 1 1.50 2 3 GG 1.03 1.41 1.69 2.44 C MODEL B-401 B-402 B-701 B-702 B-703 B-1002 B-1003 B-1004 B-1202 B-1203 B-1204 B-1205 B-1206 B-1207 B-1208 B-1602 B-1603 B-1604 B-1605 B-1606 B-1607 B-1608 B-1609 B-1610 A 2.125 3.656 5.125 6.125 8.00 B 7.62 16.62 7.00 16.00 25.00 15.50 24.50 33.50 14.62 23.50 32.38 41.38 50.50 59.50 68.38 13.60 22.60 31.60 40.60 49.60 58.60 67.60 76.60 85.60 3.50 — 6.25 C/F 7.
PAGE 3
Dimensions Two Pass GG Z (4 places) M B HH N Q K C A R R E WATER COOLED B J L D H (2 each end) G Flange Size 1 1.50 2 3 C MODEL B-701 B-702 B-703 B-1002 B-1003 B-1004 B-1202 B-1203 B-1204 B-1205 B-1206 B-1207 B-1208 B-1602 B-1603 B-1604 B-1605 B-1606 B-1607 B-1608 B-1609 B-1610 A 3.656 5.125 6.125 8.00 B 7.00 16.00 25.00 15.50 24.50 33.50 14.62 23.50 32.38 41.38 50.50 59.50 68.38 13.60 22.60 31.60 40.60 49.60 58.60 67.60 76.60 85.60 HH Z - CF Z - CFM 2.06 2.75 3.06 4.
PAGE 4
Dimensions Four Pass GG Z (4 places) M B HH N S S K Q C A R E L D H (2 each end) G Flange Size 1 1.50 2 3 C MODEL A B-701 B-702 3.656 B-703 B-1002 B-1003 5.125 B-1004 B-1202 B-1203 B-1204 B-1205 6.125 B-1206 B-1207 B-1208 B-1602 B-1603 B-1604 B-1605 B-1606 8.00 B-1607 B-1608 B-1609 B-1610 B 7.00 16.00 25.00 15.50 24.50 33.50 14.62 23.50 32.38 41.38 50.50 59.50 68.38 13.60 22.60 31.60 40.60 49.60 58.60 67.60 76.60 85.60 7.38 8.81 12.13 F G GG HH Z - CF Z - CFM 1.03 1.41 1.69 2.
PAGE 5
Performance Curves 600 31 500 30 28 400 26 300 22 200 Horsepower Removed in Cooler 24 19 29 27 100 80 17 21 60 11 23 50 20 40 15 25 16 18 12 14 30 13 20 9 10 WATER COOLED B 6 10 8 7 4 8 5 6 5 3 4 2 OIL  P 3 2 = 5 PSI = 10 PSI ● = 20 PSI 1 1 1 2 3 4 5 6 8 10 20 30 40 GPM Oil Through Cooler 50 60 80 100 150 200 Model *1. B-401-A4-0 *2. B-402-A4-0 *3. B-701-A4-T 4. B-701-B6-F 5. B-701-C6-T *6. B-702-A4-T 7. B-702-B4-F 8. B-702-C6-T *9. B-703-A4-T 10.
PAGE 6
Selection Procedure 5 Performance Curves are based on 100SSU oil leaving the cooler 40°F higher than the water temperature used for cooling. This is also referred to as a 40°F approach temperature. Curves are based on a 2:1 oil to water flow ratio. *Curves are 1:1. etermine the Heat Load. This will vary with different systems, D but typically coolers are sized to remove 25 to 50% of the input nameplate horsepower. (Example: 100 HP Power Unit x .33 = 33 HP Heat load.) If BTU/Hr.