Micro Case S100 TG © 2020 Thermaltake Technology Co., Ltd. All Rights Reserved. A-2020.
Contents Chapter 1. Product Introduction 1.1 Specification 01 1.2 Accessory 02 1.3 Warning and Notice 03 Chapter 2. Installation Guide 2.1 Side Panel Disassembly 05 2.2 PSU Installation 06 2.3 Motherboard Installation 07 2.4 3.5" & 2.5" HDD Installation 08 2.5 PCI Slot Usage 09 2.6 Air Cooling Installation 10 2.7 Radiator Installation 11 Chapter 3. Leads Installation 3.1 Case LED Connection 12 3.2 USB 2.0 Connection 12 3.3 USB 3.0 Connection 12 3.
Model S100 TG Case Type Micro tower Chassis Dimension (H*W*D) 411 x 220 x 441 mm (16.18 x 8.66 x 17.36 inch) Side Panel 4mm Tempered Glass x 1 Cooling System Rear(exhaust): 120 x 120 x 25 mm fan (1000 rpm, 16 dBA) x 1 S100 TG Snow Edition RESET USB3.0 Drive Bays - Accessible - Hidden 2 x 3.5“ or 2 x 2.5” (HDD Rack) 2 x 2.5” (HDD Bracket) Expansion Slots 4 Motherboards 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX) I/O Port 1 x USB 3.0, 2 x USB 2.
CPU Cooler Height Limitation VGA ( Add- on card) Length Limitation Atenção!! Limite de altura para o dissipador do CPU: O limite de altura para o dissipador do CPU é 165 mm (6,5 polegadas). Limite de comprimento para VGA (placa gráfica): O limite de comprimento para VGA (placa gráfica) é 330 mm (13 polegadas). 警告！！ CPU 冷卻器的高度限制： 請確保 CPU 冷卻器的高度不超過 165 mm (6.
English / Remove the screws on the back of the chassis, and open the side panel. Deutsch / Entfernen Sie die Schrauben auf der Rückseite des Gehäuses und öffnen Sie das Seitenteil. Français / Enlevez les vis à l’arrière du châssis et ouvrez le panneau latéral. Español / Extraiga los tornillos de la parte posterior de la caja y abra el panel lateral.
In front M/B Tray A 2.5” HDD 3.5” HDD Behind M/B Tray B 2.
Air Cooling Installation 200mm x1 120mm x2 120mm x1 140mm x2 140mm x2 120mm x2 9 10
Radiator Installation 280mm x1 120mm x1 240mm x1 240mm x1 280mm x1 11 12
13 14
15 16
Thermaltake Power Supply Series(Optional) 17 18
19 20
