Installation Manual

© 2015 Thermaltake Technology Co., Ltd. All Rights Reserved. www.thermaltake.com
This product is intended for installation only by expert users. Please consult with a qualified technician for
installation. Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack
and fail ! Do not clean it using alcohol either !
Pacific
R22
Reservoir
Installation Guide
Parts List
Reservoir
Clip
Nuts
Wrench
G1/4 Stop Plug
Wrench
Cable Ties
Long Screws
A x 2
B x 4
C x 4
D x 1
E x 3
F x 1
G x 4
This product comes with
one mounting kit, please
follow the installation
guide to install it.
Install your fittings and
tubes, remember to use
the bottom as an outlet
and top as an inlet.
After adding the recommended
coolant, remember to fill the
reservoir to only 80% and
leave the fill port cap off. This
will help stabilize your internal
loop pressure
1
2
3
4
F
E
E
Fill Port
B
A
C
D
Five predrilled G1/4” holes
provide multiple options for
placing the G1/4” fittings
as inlet or outlet.
NOTE: The reservoir diagram is for reference only, length may differ depending on the model of reservoir