VD6000 SERIES User Manual C 2006 Thermaltake Technology Co.,Ltd. All Rights Reserved.
Contents Chapter l Product Introduction 1.1 Specification 2 Chapter 2 Case Mechanical Operation 2.1 How to open the side panel 3 2.2 Front fan Installation (Optional) 4 2.3 Installing 5.25" device 5 2.4 PCI slot tool-free function operation 7 2.5 Installing 3.5" HDD 8 2.6 Installing 3.5" device 9 Chapter 3 Motherboard & Leads Installation 3.1 Motherboard installation 11 3.2 Case LED connections 12 3.3 USB2.0 & IEEE1394 Firewire connection 13 3.4 Audio connections 14 Chapter 4 Other 4.
Chapter l Product Introduction 1.1 Specification VD6000BNS >>> Model VD6000BNS Case Type Middle Tower Net Weight 6.15 kg Dimension (H*W*D) 410 x 190 x 510 mm Front (Intake) : 120 x 120 x 25 mm (optional) Cooling System Rear (Exhaust) : 120 x 120 x 25 mm, 1300rpm, 17dBA Drive Bays - Accessible - Hidden 10 4 x 5.25 5.25" , 2 x 3.5" 3.5 4 x 3.5" 3.
Chapter2 Case Mechanical Operation 2.2 Front Fan Installation (Optional) 2.1 How to open the side panel Œ Remove the front panel first. u To remove the side panel, please remove upper and bottom screws on the back of the case. 2 Please find the side panel key in the back of the chassis,and open the side panel as shown below. 3 Make sure the side panel lock is opened. • Place the fan as shown. w Secure the fan by screws. 4 Push the bottom then swing out the side panel.
2.3 Installing 5.25" Device Œ Remove the front panel. • Remove the 5.25" drive bay metal cover. •Unscrew the 5.25" drive bay cover. ‘ Place 5.25" device into the drive bay. Ž Remove the 5.25" drive bay cover. ’ Put back the lock device and turn lock device clockwise to lock. • Turn lock device counterclockwise to unlock. • Remove lock device. “ 5.25" device installation complete.
2.4 PCI slot tool-free function operation 2.5 Installing 3.5" HDD u Turn lock device counter-clockwise to unlock. v Remove lock device. ΠOpen the plastic clip then take off the PCI bracket. 4 w Place HDD into the drive bay. Put back the lock device and turn lock device clockwise to secure the HDD.
2.6 Installing 3.5" device Œ Remove the front panel. • Remove the 3.5" drive bay cover . • Insert lock device and turn clockwise to secure the drive. 6 3.5" device installation complete. Ž Turn lock device counter-clockwise to unlock. • Remove lock device and insert drive from the front of the chassis.
Chapter3 Motherboard & Leads Installation 3.2 Case LED connections 3.1 Motherboard Installation Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. The cases are applicable with Standard ATX, Micro ATX motherboards. Your motherboard may require a special I/O Panel, which should be included with your motherboard.
3.3 USB2.0 & IEEE1394 Firewire connection 3.4 Audio connections USB connection Please consult your motherboard manual to find out the section of "USB connection". Please refer to the following illustration of Audio connector and your motherboard user manual. USB VCC 2 VCC 1 -D 1 -D 2 +D 1 +D 2 GROUND GROUND Please select the motherboard which used AC'97 or HD Audio (Azalia), (be aware of that your audio supports AC'97 or HD Audio (Azalia)) or it will damage your device(s).
Chapter4 Other TM 4.1 Purepower power supply (optional) The Thermaltake SilentTM Purepower specification meets Intel Pentium 4 and AMD K7; it offers plenty of functions, which mainly include: 1.Automatic Fan Speed Control: The Silent PurepowerTM power supply can detect the inside heat and automatically adjust the fan speed to provide adequate airflow. 2.Ultra Silent:Ball bearing fans with high reliability and super low acoustic noise under all load condition.
