VD2000BNS User Manual C 2006 Thermaltake Technology Co.,Ltd. All Rights Reserved.
Contents Chapter l Product Introduction 1.1 Specification 2 Chapter 2 Case Mechanical Operation 2.1 How to open the side panel 3 2.2 Front fan Installation (Optional) 4 2.3 Installing 5.25" device 5 2.4 PCI slot tool-free function operation 7 2.5 Installing 3.5" HDD 8 2.6 Installing 3.5" device 9 Chapter 3 Motherboard & Leads Installation 3.1 Motherboard installation 11 3.2 Case LED connections 12 3.3 USB2.0 & IEEE1394 Firewire connection 13 3.
Chapter l Product Introduction 1.1 Specification VD2000BNS >>> Model VD2000BNS Case Type Middle Tower Net Weight 5.68 kg Dimension (H*W*D) 420 x 190 x 480 mm Front (Intake) : 120 x 120 x 25 mm (optional) Cooling System Rear (Exhaust) : 120 x 120 x 25 mm, 1300rpm, 17dBA Drive Bays - Accessible - Hidden 10 4 x 5.25 5.25" , 2 x 3.5" 3.5 4 x 3.5" 3.5 Material SECC Japanese steel Color Black Expansion Slots 7 Motherboards Micro ATX , Standard ATX § All mesh front panel design § Dual USB 2.
Chapter2 Case Mechanical Operation 2.1 How to open the side panel 2.2 Front Fan Installation (Optional) Œ Remove the front panel first. u To remove the side panel, please remove upper and bottom screws on the back of the case. • Place the fan as shown. w Secure the fan by screws. v Pull the side panel to release it. x Front fan installation completed.
2.3 Installing 5.25" Device • Remove the 5.25" drive bay metal cover. Œ Remove the front panel. ‘ Place 5.25" device into the drive bay. • Remove the 5.25" drive bay cover with mesh and black sponge. ’ Put back the lock device and turn lock device clockwise to lock. Ž Turn lock device counterclockwise to unlock. • Remove lock device. “ 5.25" device installation complete.
2.4 PCI slot tool-free function operation 2.5 Installing 3.5" HDD u Turn lock device counter-clockwise to unlock. ΠOpen the plastic clip then take off the PCI bracket. v Remove lock device. w Place HDD into the drive bay. x Put back the lock device and turn lock device clockwise to secure the HDD.
2.6 Installing 3.5" device Œ Remove the front panel. • Remove the 3.5" drive bay cover with mesh and black sponge. • Insert lock device and turn clockwise to secure the drive. ‘ 3.5" device installation complete. Ž Turn lock device counter-clockwise to unlock. • Remove lock device and insert drive from the front of the chassis.
Chapter3 Motherboard & Leads Installation 3.2 Case LED connections 3.1 Motherboard Installation Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. The cases are applicable with Standard ATX, Micro ATX motherboards. Your motherboard may require a special I/O Panel, which should be included with your motherboard.
3.3 USB2.0 & IEEE1394 Firewire connection USB connection Please consult your motherboard manual to find out the section of "USB connection". 3.4 Ear & MIC connections Please consult your motherboard manual to find out the section of "front panel audio connector".
Chapter4 Other TM 4.1 Purepower power supply (optional) The Thermaltake Silent TM Purepower specification meets Intel Pentium 4 and AMD K7; it offers plenty of functions, which mainly include: 1.Automatic Fan Speed Control: The Silent Purepower TM power supply can detect the inside heat and automatically adjust the fan speed to provide adequate airflow. 2.Ultra Silent:Ball bearing fans with high reliability and super low acoustic noise under all load condition.
