C 2007 Thermaltake Technology Co., Ltd. All Rights Reserved. 2007.04 All other registered trademarks belong to their respective companies. www.thermaltake.
Chapter 1. Product Introduction C ontents Specification Chapter 1. Product Introduction 1-1 Specification 02 Chapter 2. Case Mechanical Operation 2-1 How to open the side panel 03 2-2 External 5.25" device installation 04 2-3 External 3.
Chapter 2. Case Mechanical Operation 2-1 How to open the side panel 2-2 External 5.25" device installation 1 1 To remove the side panel, please remove upper and bottom thumb screws on the back of the case. Remove the front panel 3 2 2 Pull out the front panel as shown Remove the side panel, please refer to the orientation of the picture. Open the side panel 3 Remove the 5.
8 Remove the 5.25" drive bay metal cover Find the proper openings 5 1 9 2 Turn lock device counterclockwise to unlock 1 2 Put back the lock device and turn lock device clockwise to lock 6 10 Remove lock device 7 Place 5.25" device into the drive bay 5 VG1000BNS 5.
2-3 External 3.5" device installation 1 Pull out the front panel as shown 2 Remove the 3.5" drive bay plastic cover 1 3 2 Turn lock device counterclockwise to unlock 4 Remove lock device and insert the device into the 3.
2-4 HDD installation 7 1 2 Put back the lock device and turn clockwise to secure the drive 1 1 2 Turn lock device counterclockwise to unlock 8 2 Remove lock device then place HDD into drive bay 3.5" device installation complete Important Notice: The lower 3.5" external drive bay is not compatible with FDD, but HDD is able to be installed in it. While installing HDD, please remove the tool-free kit and secure HDD by screws.
2-5 Front fan installation (optional) 1 Remove the front panel 2 Place the fan as shown 3 Secure the fan by screws 11 VG1000BNS 2-6 PCI slot usage 1 Remove thumb screw from PCI slot bracket 2 Take off the PCI slot bracket as shown 3 Insert the PCI device into PCI slot 12
2-7 How to install PSU 1 4 Put back the PCI slot bracket 5 Screw the thumb screw as shown 6 Finish installation Place the PSU over the location as shown 2 Secure it by screws 3 Finish installation 13 VG1000BNS 14
Chapter.3 Motherboard & Leads Installation 3-1 Motherboard Installation Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. The cases are applicable with Standard ATX, Micro ATX motherboards. Your motherboard may require a special I/O Panel, which should be included with your motherboard.
3-3 USB2.0 connection 3-4 USB connection Please consult your motherboard manual to find out the section of "USB connection". Audio connection Please consult your motherboard manual to find out the section of "front panel audio connector".
Chapter.4 RSI Cooler and Power Supply 4-1 RSI Cooler (Optional) P/N : CL-P0441 Designed for Intel Core 2 Duo Processor Application for Intel Core 2 Duo / Pentium D / Celeron series (Socket LGA775) 4-2 RSI Power Supply (Optional) PCI ATX PFC Express 12V 2.0 Litepower X1 400W Universal AMD/ Intel Pin Dual Core Support S-ATA 24(20) X2 FEATURES: - Aluminum Crotch Fin provides more heat dissipation area. - Silent operation. Optimized solution for low power processors.
memo 21 memo VG1000BNS 22
