User`s manual

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
Should you have any questions regarding the
aforementioned steps, please contact Thermaltake
directly. Failure to follow the proper procedures may
cause severe bodily harm or PC component damage.
For Support or General Inquiries, please contact us at:
Thermaltake Technology USA
Toll Free: [phone]
Email: [e-mail]
Thermaltake Europe B.V.
Tel:[phone]
Email: @thermaltake.com.tw
Thermaltake Beijing Co.Ltd.
Tel:[phone]/3189 ext.16
Email: [e-mail]
Thermaltake Australia and New Zealand Pty Ltd
Tel:[phone]
Email: [e-mail]
Thermaltake Japan Inc.
Email: [e-mail]
tt.europe
1
2
3
4
5
Condition 1: No DC output. The fan or fans are motionless
Check:
1-1 Is the AC inlet plug firmly plugged into the PSU inlet
socket?
1-2 Is the wall socket, extension power cord, power strip
or surge protector in use, fully functional and wall power
switch turned 'ON'?
1-3 Is the Main Board socket (24pin) plug fully and firmly
inserted?
Condition 2: The fan or fans began rotating and then stopped.
The system hangs without proceeding any further.
Check:
2-1 Are the peripheral connectors firmly plugged into
accessory devices, such as the main hard drive, CD ROM
, etc?
2-2 If a plug has been inadvertently connected in an off-set or
reversed position, unplug the AC power source, reconnect
the offending connectors and then wait for 30 seconds
before replug in the AC power source and try again.
Note:
If the power supply is still unable to power up after following
the above instruction, please send the unit back to your dealer
or retailer for after sales service.
5. Trouble Shooting
1413
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201