TMT-2000S Data Sheet

www.thermaltronics.com
TMT-2000S
Soldering Station
SYSTEM CONFIGURATIONS
Model Number Handpiece Tip Cartridge Connector
TMT-2000S-K SHP-K K Series 3-Pin
TMT-2000S-PM SHP-PM P Series 8-Pin
TMT-2000S-SM SHP-SM S Series 8-Pin
TMT-2000PS Power Supply
SHH-4
1
Soldering
Handpiece Holder
SHP-K Soldering Handpiece
RMP-1 Tip Removal Pad
BC-1 Brass Curls
SPG-1 Sulphide Free Sponge
CC-1 Connection Cable
1
Optional Feature: SHH-5 sleep workstand
CERTIFICATION MARKS
*Tested & certied by TUV-SUD
LEAD
FREE
ESD
FREE
TMT-2000S SPECIFICATIONS
Input Line
Voltage:
TMT-2000PS 100-240 VAC, 55W
Surface Resistivity: 10
5
- 10
9
Ω/sq
Tip to Ground Potential: <2 mV
Tip to Ground Resistance: <2 Ohms DC
Idle temperature Stability: +/- 1.1 °C (2 °F)
Max Enclosure Temperature: 50 °C (122 °F)
Fuse: TMT-2000PS 250V 1A “Slo-Blo”
Output Power (Maximum): 50 Watts
Output Frequency: 470 KHz
Size (W x H x D): 110mm x 155mm x 92mm
Weight: 1.30 KG
Input Line Frequency: 50/60 Hz
TMT-2000S
The TMT-2000S is based on Curie Heat Technology
which responds to the thermal demands of each
solder joint by adjusting the power instantaneously,
thereby meeting the exact requirements of the
substrate component and solder material.
ESD
FREE
LEAD
FREE
Curie Heat Technology operating at 470KHz.
Max exibility, allows the use of K, P, S Series tips.
Extremely compact, weighs just 1.3KG.
No calibration or operator training required.
No additional coil assembly costs.
PACKING LIST