TMT-9000S Data Sheet

www.thermaltronics.com
TMT-9000PS Power Supply
SHH-1 Soldering
Handpiece Holder
SHP-1 Soldering Handpiece
RMP-1 Tip Removal Pad
SG-1-GR Handpiece Grip Green
SG-1-GY Handpiece Grip Gray
BC-1 Brass Curls
SPG-1 Sulphide Free Sponge
M7CH176 Soldering tip cartridge
CERTIFICATION MARKS
LEAD
FREE
ESD
FREE
TMT-9000S SPECIFICATIONS
Input Line
Voltage:
TMT-9000PS-1
TMT-9000PS-2
100-110 VAC
220-240 VAC
Surface Resistivity: 10
5
- 10
9
Ω/sq
Tip to Ground Potential: <2 mV
Tip to Ground Resistance: <2 Ohms
Idle temperature Stability: +/- 1.1 °C (2 °F)
Max Enclosure Temperature: 50 °C (122 °F)
Fuse: TMT-9000PS-1 250V 1A “Slo-Blo”
TMT-9000PS-2 250V 0.5A “Slo-Blo”
Output Power (Maximum): 40 Watts
Output Frequency: 13.56 MHz
Size (W x H x D): 212mm x 118mm x 132mm
Weight: 3.47 KG
LCD display: 60mm x 16mm
Input Line Frequency: 50/60 Hz
TMT-9000S
Soldering & Rework Station
TMT-9000S
The TMT-9000S is based on Curie Heat Technology
which responds to the thermal demands of each
solder joint by adjusting the power instantaneously,
thereby meeting the exact requirements of the
substrate component and solder material.
ESD
FREE
LEAD
FREE
High thermal recovery & performance.
13.56MHz power supply with built-in LCD display.
Dual switchable soldering ports.
No calibration or operator training required.
No additional coil assembly costs.
PACKING LIST