Technical Datasheet

ManualsBrandsThermaltronics ManualsHobbyK Series Type 75 60° Hoof Tip w/Dent (3.10mm) (TMT-2000S-K)

Check for latest datasheet

K75WV031 Datasheet

Technical Specifications

75 Type Cartridge

350°C - 398°C

RoHS Compliant

/ Lead Free:

YES

For Use With:

TMT-2000PS, PS900 w/SHP-K, MFR-PS1100/MFR-PS2200 w/SHP-KM

Material Composition Patented Color Band

Thermaltronics tip cartridges will typically idle within a temperature range of +/-1.1°C. However, there is variation in idle temperature across tip geometries

within an individual temperature series. Thermaltronics offers a wide variety of tip geometries from 0.25mm fine point tip to 5mm chisel. The length and

geometry of a tip will have an influence on the tip idle temperature. To accurately measure idle temperature it will depend greatly on the measurement method,

technique and equipment used. Two different methods or the use of alternative equipment will produce different test results.

Please refer to http://www.rohs.gov.uk for details on RoHS Compliance.

K75WV031

Hoof w/Dent 60° 3.10mm

(0.122")

Tip Style: Hoof w/Dent

Tip Width: 3.10mm (0.12")

Tip Length: 16.40mm (0.65")

All components

are RoHS

compliant and

Lead-Free.