Installation Sheet

2.3" (58mm)

0.39" (10mm)

8x8" (200x200mm)

8" (200mm)

EPDM Gasket

Flow Restrictor

Brass Joint Ball

Protective Cap

EPDM Screen Washer

Stainless Steel

Shower Head

This shower head is supplied with a blue 1.6 GPM

flow restrictor and meets CEC Requirements.

If you are not satisfied with the flow, non-California

residents can replace the restrictor with this white

2.5GPM restrictor. Check local water conservation

codes before changing the restrictor.

IMPORTANT: Re-insert protective stainless-steel

screen on top of restrictor.

81231_NC

Shower Head Installation Suggestion Only.

Teflon Tape and Shower Arm are excluded

in Shower Head Packing box.

8” Square shower head Installation instruction

Use a licensed plumber

for installation

1. Wrap Teflon tape clockwise

2. Attach shower head to shower

arm and rotate clock wise by hand,

then tighten with a wrench.

PAGE 1
8” Square shower head Installation instruction 2.3" (58mm) 0.39" (10mm) Use a licensed plumber for installation Protective Cap EPDM Screen Washer 8x8" (200x200mm) Flow Restrictor 8" (200mm) Brass Joint Ball EPDM Gasket 8" (200mm) Stainless Steel Shower Head 1. Wrap Teflon tape clockwise 2. Attach shower head to shower arm and rotate clock wise by hand, then tighten with a wrench. Shower Head Installation Suggestion Only. Teflon Tape and Shower Arm are excluded in Shower Head Packing box.