Easy Start Control Installation Manual For Tutorials and Troubleshooting visit www.thermasol.
Easy Start Control Installation Instructions 1 Important Information Before You Install The Easy Start Control must be installed outside the shower. The control should be installed outside the steam shower as an optional control for your convenience. Keep in mind that the cord provided is 50 feet long. PLEASE REVIEW WARNINGS BELOW AND LEAVE THIS MANUAL WITH HOMEOWNER DO NOT USE THIS PRODUCT UNLESS YOU HAVE CONSULTED WITH YOUR DOCTOR AND RECEIVED WRITTEN PERMISSION TO DO SO.
Easy Start Control Installation Instructions 2 Tools and Materials Parts Enclosed: Easy Start Control Silicone 50-foot CAN-bus cable Item 03-6152-050 Y-connector Item 03-6204 Installation instructions, warranty, static cling warning label Materials needed: o Drill o Inside shower control (excludes MicroTouch) o Steam Generator 3 Control Installation and Data Cable Connection Surface Mount Installation ESC-XX, ESM-XX, EST-XX, ESR-XX Data cable to generator or inside steam shower control Bathroom wal
Easy Start Control Installation Instructions 4 Control Installation and Data Cable Connection Back of Control Route the data cable (included with easy start) through the finished wall to the back side of the control. The other end of the cable runs to to y-connector. See possible configurations in step 5. NOTE: It is recommended to run the cable through electrical conduit. Connector Detail DO NOT pinch, nail, staple, wedge, or bind the data cable.
Easy Start Control Installation Instructions 5 Configurations GENERATOR STEAMHEAD THERMATOUCH SERENITY, LIGHT, SOUND, RAIN HEAD POWER DISTRIBUTION MODULE (PDM) 25’ M12 Cable (03-6152-050) SHIPS WITH SERENITY & THERMATOUCH CAN-bus EASY START CONTROL 50’ CAN-bus Cable (03-6152-050) SHIPS WITH GENERATOR GENERATOR STEAMHEAD THERMATOUCH SERENITY, LIGHT, SOUND, RAIN HEAD POWER DISTRIBUTION MODULE (PDM) 25’ M12 Cable (03-6152-050) CAN-bus EASY START CONTROL SHIPS WITH SERENITY & THERMATOUCH SOLITUDE WI
Easy Start Control Installation Instructions GENERATOR STEAMHEAD THERMATOUCH EASY START CONTROL POWER DISTRIBUTION MODULE (PDM) CAN-bus 25’ M12 Cable (03-6152-050) SHIPS WITH SERENITY & THERMATOUCH SOLITUDE WIRELESS MODULE (SWM) 50’ CAN-bus Cable (03-6152-050) SHIPS WITH GENERATOR GENERATOR STEAMHEAD THERMATOUCH EASY START CONTROL 25’ M12 Cable (03-6152-050) SHIPS WITH SERENITY & THERMATOUCH CAN-bus POWER DISTRIBUTION MODULE (PDM) 50’ CAN-bus Cable (03-6152-050) SHIPS WITH GENERATOR THERMASOL.
Easy Start Control Installation Instructions GENERATOR STEAMHEAD SIGNATURE SERIES EASY START CONTROL Y-connector (03-6204) 50’ CAN-bus Cable (03-6152-050) SHIPS WITH GENERATOR GENERATOR STEAMHEAD SIGNATURE SERIES SOLITUDE WIRELESS MODULE (SWM) EASY START CONTROL Y-connector (03-6204) 50’ CAN-bus Cable (03-6152-050) SHIPS WITH GENERATOR THERMASOL.COM - 1.800.776.
1958 STEAM WAY ROUND ROCK, TX 78665 PHONE: 800.776.0711 | FAX: 800.556.5257 | WWW.THERMASOL .
