Installation Guide

ManualsBrandsThermaSol ManualsSteam HeadsThermaSol Contemporary Retractable Aromatherapy Steam Head

Steamhead Installation

Installation Manual

For Tutorials and Troubleshooting visit www.thermasol.com/solutions

From top: NTST-XX Traditional, NTSM-XX Modern, NTSC-XX Contemporary, NTSR-XX Regency

OVER 55 YEARS OF STEAM SHOWER INNOVATION

Summary of content (5 pages)

PAGE 1
Steamhead Installation Installation Manual For Tutorials and Troubleshooting visit www.thermasol.
PAGE 2
Steamhead Installation Instructions 1 Important Information Before You Install The steamhead should be installed 12" from the floor and 6" from any wall. Locate as far as possible from the bathing seating area or location of the users and not below any fixtures. PLEASE REVIEW WARNINGS BELOW AND LEAVE THIS MANUAL WITH HOMEOWNER DO NOT USE THIS PRODUCT UNLESS YOU HAVE CONSULTED WITH YOUR DOCTOR AND RECEIVED WRITTEN PERMISSION TO DO SO. USE OF THIS PRODUCT MAY BE HAZARDOUS TO YOUR HEALTH.
PAGE 3
Steamhead Installation Instructions 3 Steamhead Location Steamhead Location DO NOT install the steamhead near the seating area or the user. DO NOT forget to install the steamhead rough-in fitting! INSTALL steamhead as far as possible from the inshower controller. NEVER install the steamhead under controller Install the steamhead 12" from the floor or bathtub rim and 6" from any corner.
PAGE 4
Steamhead Installation Instructions 4 Steamhead Installation A A When finalizing installation, install the steamhead into the housing, making sure that the aromatherapy fill channels are facing upwards. B To ensure that no moisture gets behind the steamhead and into the wall, place a generous bead of waterproof silicone around the steamhead, using the machined groove (located on the back of the steamhead) as a guide.
PAGE 5
1958 STEAM WAY ROUND ROCK, TX 78665 PHONE: 800.776.0711 | SUPPORT@THERMASOL .COM | WWW.THERMASOL .COM WWW.THERMASOL .